Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/23 ▾
  1. 1.Regulations, Records & Publications0/5
    1. What an A&P mechanic may do and approve
    2. Major or minor work, approved data and FAA Form 337
    3. Writing maintenance and inspection record entries
    4. Keeping records, AD status and inspection timing
    5. Keeping your mechanic certificate usable
  2. 2.Basic Electricity0/5
    1. Ohm's law, power and what sets a wire's resistance
    2. Series, parallel and series-parallel circuits
    3. Wire ratings, circuit protection and test meters
    4. Aircraft batteries and DC motors
    5. Alternating current, transformers and diodes
  3. 3.Weight & Balance, Math & Physics0/4
    1. Weight and balance terms: datum, empty weight, useful load and MAC
    2. Finding and correcting the center of gravity
    3. Shop mathematics: order of operations, areas, volumes and ratios
    4. Physics for aviation: power, levers, fluids, gases and stress
  4. 4.Materials, Hardware & Drawings0/4
    1. Reading aircraft drawings: lines, sections, tolerances and diagrams
    2. Fluid lines: flares, flareless fittings and flexible hose
    3. Corrosion: how it starts, the forms it takes and how to find it
    4. Aluminum alloys, rivets, bolts, nuts, torque and safety wire
  5. 5.Ground Operation, Servicing & Human Factors0/5
    1. Fire protection on the ramp and during engine starts
    2. Fueling, oxygen servicing and turbine engine starts
    3. Towing, taxi light signals and propeller safety
    4. Inspections and nondestructive testing methods
    5. Human factors: the Dirty Dozen and safety nets
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 3 of 5

Weight & Balance, Math & Physics Study Guide — FAA A&P Mechanic (General)

28 free practice questions

This pool covers three ACS subjects that share one skill: setting up a calculation correctly. Weight and balance asks you to find and move the center of gravity, mathematics covers the shop arithmetic a mechanic uses, and physics covers work, pressure, gases and stress. Calculation items give you all the numbers, so the points go to the person who picks the right formula and the right reference point.

Key takeaways

  • The datum location comes from the Type Certificate Data Sheet or Aircraft Specifications, and CG = total moment / total weight.
  • Subtract tare from each scale reading before computing any moment.
  • To move cargo, weight to shift = total weight × CG change / distance moved, using the distance between stations, not a station number.
  • Gas-law problems must be worked in absolute pressure and absolute temperature, then converted back.
  • One horsepower is 550 foot-pounds per second, or 33,000 foot-pounds per minute.

Lessons in this chapter

4 short lessons · 4 min read

  1. 1Weight and balance terms: datum, empty weight, useful load and MAC1 min
  2. 2Finding and correcting the center of gravity1 min
  3. 3Shop mathematics: order of operations, areas, volumes and ratios1 min
  4. 4Physics for aviation: power, levers, fluids, gases and stress1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, FAA Aircraft Handbooks and Manuals (FAA-H-8083-30B AMT Handbook General; FAA-H-8083-1 Weight and Balance Handbook)

FAA A&P Mechanic (General) cheat sheet: every key fact on one page →Next chapter: Materials, Hardware & Drawings →

Practice questions based on 14 CFR Parts 43 and 65 and the FAA Aviation Maintenance Technician Handbook—General (FAA-H-8083-30). This site is not affiliated with or endorsed by the Federal Aviation Administration. This bank covers the GENERAL written test only; the Airframe and Powerplant written tests and the oral and practical exams are separate. Torque values, servicing quantities, corrosion rework limits, and inspection criteria always come from the manufacturer's current maintenance data and the applicable airworthiness directives — never from a practice test. Confirm current eligibility and testing requirements with the FAA before you test. About the A&P mechanic certificate →