Chapters0/23 ▾
Chapter 5 · Lesson 5 of 5
Human factors: the Dirty Dozen and safety nets
1 min read
The Dirty Dozen was developed by Transport Canada after a series of maintenance-related accidents.
It names twelve conditions that most often come before a maintenance error: lack of communication, complacency, lack of knowledge, distraction, lack of teamwork, fatigue, lack of resources, pressure, lack of assertiveness, stress, lack of awareness, and norms. It is a training tool, not a regulation, and each item is paired with practical safety nets.
- Distraction: when you come back to a job, go back at least three steps and tag incomplete work, because the mind assumes a step was done when it was not.
- Norms: unwritten "how we do it here" practices that bypass approved data. Work to current instructions and challenge any practice you cannot find in the manual.
- Shift turnover: a written record plus a face-to-face briefing, with each step signed by the person who did it as it is done.
Example: at the end of a shift a technician cannot find a flashlight used inside an engine nacelle, and the flight leaves in 20 minutes.
The correct call is to hold the aircraft and find the tool under the tool control program. Schedule pressure is itself one of the Dirty Dozen, and a loose object can jam a control or chafe a wire in flight.
Check yourself
1. A technician is called away in the middle of a torque sequence on a flight control attachment. What is the recommended practice when returning to the job?
2. The 'Dirty Dozen' used throughout aviation maintenance human factors training was originally identified by which organization, and what does the list represent?
Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, FAA Aircraft Handbooks and Manuals (FAA-H-8083-30B AMT Handbook, General), 14 CFR Part 43: Maintenance, Preventive Maintenance, Rebuilding, and Alteration
FAA A&P Mechanic (General) cheat sheet: every key fact on one page →