Chapters0/23 ▾
Chapter 2 · Lesson 2 of 5
Series, parallel and series-parallel circuits
1 min read
| Quantity | Series | Parallel |
|---|---|---|
| Current | Same through every part | Branch currents add |
| Voltage | Drops add up to the source | Full source voltage on each branch |
| Total resistance | Sum of the resistors | Less than the smallest branch |
Series example: 2, 4 and 8 ohms across 28 volts give 14 ohms total and 2 amperes, so the drops are 4, 8 and 16 volts, adding back to 28. Parallel example: 6 and 3 ohms across 12 volts carry 2 and 4 amperes, 6 amperes in all, so the total resistance is 12 / 6 = 2 ohms.
For two branches, product over sum gives the same answer: (6 × 3) / (6 + 3) = 2 ohms.
For a series-parallel circuit, reduce the parallel group first. A 3-ohm resistor in series with two 8-ohm resistors in parallel: the pair is 4 ohms, the total is 7 ohms, and 28 volts drives 4 amperes. The 3-ohm resistor drops 12 volts, leaving 16 volts across the pair, so each 8-ohm branch carries 2 amperes.
For troubleshooting, one open in a series string stops all current, so the good parts read zero volts and the full source voltage appears across the break. One open branch in parallel leaves the others working and lowers the total current.
Check yourself
1. A 24-volt source feeds a 4-ohm resistor in series with a parallel pair made up of a 12-ohm and a 6-ohm resistor. What is the current through the 12-ohm resistor?
2. Resistors of 4 ohms, 8 ohms, and 16 ohms are connected in parallel across a 24-volt source. What is the voltage across the 16-ohm resistor?
Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, FAA Aircraft Handbooks and Manuals (FAA-H-8083-30B Aviation Maintenance Technician Handbook, General)
FAA A&P Mechanic (General) cheat sheet: every key fact on one page →