Chapters0/23 ▾
Study guide · Chapter 5 of 5
Ground Operation, Servicing & Human Factors Study Guide — FAA A&P Mechanic (General)
42 free practice questions
This pool covers the work around a parked or taxiing aircraft and the habits that keep a mechanic from making mistakes. It joins three ACS subjects: ground operations and servicing, inspection concepts and techniques, and human factors. Most questions ask for the safe procedure and the reason behind it, so learn the why along with the what.
Key takeaways
- Never use water on a burning magnesium wheel; blanket it with dry powder.
- For fueling, ground the aircraft, ground the truck, bond the truck to the aircraft, then bond the nozzle, and remove in reverse order.
- Treat every propeller as live, because a broken magneto P-lead leaves the magneto able to fire with the switch off.
- Annual and 100-hour inspections use a checklist covering at least the scope and detail of part 43 appendix D.
- After an interruption, go back at least three steps, and never release an aircraft with a tool unaccounted for.
Lessons in this chapter
5 short lessons · 5 min read
- 1Fire protection on the ramp and during engine starts1 min
- 2Fueling, oxygen servicing and turbine engine starts1 min
- 3Towing, taxi light signals and propeller safety1 min
- 4Inspections and nondestructive testing methods1 min
- 5Human factors: the Dirty Dozen and safety nets1 min
Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, FAA Aircraft Handbooks and Manuals (FAA-H-8083-30B AMT Handbook, General), 14 CFR Part 43: Maintenance, Preventive Maintenance, Rebuilding, and Alteration
FAA A&P Mechanic (General) cheat sheet: every key fact on one page →Practice tests
Practice questions based on 14 CFR Parts 43 and 65 and the FAA Aviation Maintenance Technician Handbook—General (FAA-H-8083-30). This site is not affiliated with or endorsed by the Federal Aviation Administration. This bank covers the GENERAL written test only; the Airframe and Powerplant written tests and the oral and practical exams are separate. Torque values, servicing quantities, corrosion rework limits, and inspection criteria always come from the manufacturer's current maintenance data and the applicable airworthiness directives — never from a practice test. Confirm current eligibility and testing requirements with the FAA before you test. About the A&P mechanic certificate →