Chapters0/23 ▾
Chapter 5 · Lesson 3 of 5
Towing, taxi light signals and propeller safety
1 min read
When an aircraft is towed, a qualified person sits on the flight deck to apply the brakes if the tow bar fails or the aircraft swings, and wing walkers watch the wingtips and tail.
The tow bar is built for tension and compression only, so turning the nosewheel past its steering limits puts twisting loads into the steering. Tow no faster than the walking team can keep up.
| Tower light, aircraft on the ground | Meaning |
|---|---|
| Flashing green | Cleared to taxi |
| Steady red | Stop |
| Flashing red | Taxi clear of the runway in use |
| Flashing white | Return to the starting point on the airport |
| Alternating red and green | Exercise extreme caution |
Light signals matter because they are how the tower talks to you when the radio fails. The exam usually picks one signal and offers the others as choices, so learn flashing red, which means leave the runway, and flashing white, which means go back to where you started.
A magneto is switched off by grounding it through its P-lead. If that lead is broken or loose, the magneto stays live no matter where the switch is, so moving one blade can fire a cylinder.
Always treat a propeller as if the ignition is on. Example: you need to turn a propeller by hand to inspect a cylinder; you keep your body out of the arc and treat the engine as able to start, even with the switch off and the keys out.
Check yourself
1. An aircraft on the airport surface receives a flashing red light signal from the control tower. What does that signal mean?
2. Which requirement applies when an aircraft is being towed with a tow bar?
Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, FAA Aircraft Handbooks and Manuals (FAA-H-8083-30B AMT Handbook, General), 14 CFR Part 43: Maintenance, Preventive Maintenance, Rebuilding, and Alteration
FAA A&P Mechanic (General) cheat sheet: every key fact on one page →