Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/23 ▾
← Back

Study guide · Chapter 1 of 5

Regulations, Records & Publications Study Guide — FAA A&P Mechanic (General)

32 free practice questions

This part of the FAA Aviation Mechanic General test checks whether you know what your certificate lets you do, what makes work major, and exactly what goes into a maintenance record. Nearly every question is anchored to a specific section of 14 CFR Parts 43, 65 and 91, so the goal is to know the rule and the one detail the distractors twist. Each topic below stands on its own.

Key takeaways

  • A mechanic may approve return to service only for work that is not a major repair or major alteration; after major work the approval comes from an IA holder, a repair station, or the manufacturer.
  • An A&P may perform and approve a 100-hour inspection, but an annual inspection requires an Inspection Authorization.
  • A 43.9 maintenance entry needs a description of the work, the completion date, and the approver's signature, certificate number and kind of certificate.
  • Form 337 for a major repair or alteration is made at least in duplicate, and the FAA copy is sent within 48 hours of approval for return to service.
  • Up to 10 hours past a 100-hour inspection is allowed only en route to the inspection, and that time is charged to the next interval.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1What an A&P mechanic may do and approve1 min
  2. 2Major or minor work, approved data and FAA Form 3371 min
  3. 3Writing maintenance and inspection record entries1 min
  4. 4Keeping records, AD status and inspection timing1 min
  5. 5Keeping your mechanic certificate usable1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, 14 CFR Part 43: Maintenance, Preventive Maintenance, Rebuilding, and Alteration, 14 CFR Part 65: Certification: Airmen Other Than Flight Crewmembers

FAA A&P Mechanic (General) cheat sheet: every key fact on one page →Next chapter: Basic Electricity →

Practice questions based on 14 CFR Parts 43 and 65 and the FAA Aviation Maintenance Technician Handbook—General (FAA-H-8083-30). This site is not affiliated with or endorsed by the Federal Aviation Administration. This bank covers the GENERAL written test only; the Airframe and Powerplant written tests and the oral and practical exams are separate. Torque values, servicing quantities, corrosion rework limits, and inspection criteria always come from the manufacturer's current maintenance data and the applicable airworthiness directives — never from a practice test. Confirm current eligibility and testing requirements with the FAA before you test. About the A&P mechanic certificate →