Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/23 ▾
← Back

Study guide · Chapter 2 of 5

Basic Electricity Study Guide — FAA A&P Mechanic (General)

28 free practice questions

The basic electricity section of the A&P General test mixes short calculations with questions about how aircraft wiring, meters and batteries behave. The math rarely goes beyond Ohm's law and the power formulas, so most points are lost by using the wrong formula or the wrong circuit rule, not by arithmetic. Each topic below teaches one idea and the way the exam tests it.

Key takeaways

  • Ohm's law is E = I × R, and power is P = E × I = I² × R = E² / R.
  • In series the current is the same everywhere and the drops add up to the source; in parallel every branch has the full source voltage and the currents add.
  • A fuse or circuit breaker is sized to protect the wire, and a tripped breaker is reset by hand only once.
  • Lead-acid specific gravity falls as the battery discharges, while nickel-cadmium specific gravity stays nearly constant and water is added only at full charge.
  • Peak AC voltage is 1.414 times the effective value, and a transformer's voltage ratio equals its turns ratio while current changes the opposite way.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Ohm's law, power and what sets a wire's resistance1 min
  2. 2Series, parallel and series-parallel circuits1 min
  3. 3Wire ratings, circuit protection and test meters1 min
  4. 4Aircraft batteries and DC motors1 min
  5. 5Alternating current, transformers and diodes1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, FAA Aircraft Handbooks and Manuals (FAA-H-8083-30B Aviation Maintenance Technician Handbook, General)

FAA A&P Mechanic (General) cheat sheet: every key fact on one page →Next chapter: Weight & Balance, Math & Physics →

Practice questions based on 14 CFR Parts 43 and 65 and the FAA Aviation Maintenance Technician Handbook—General (FAA-H-8083-30). This site is not affiliated with or endorsed by the Federal Aviation Administration. This bank covers the GENERAL written test only; the Airframe and Powerplant written tests and the oral and practical exams are separate. Torque values, servicing quantities, corrosion rework limits, and inspection criteria always come from the manufacturer's current maintenance data and the applicable airworthiness directives — never from a practice test. Confirm current eligibility and testing requirements with the FAA before you test. About the A&P mechanic certificate →