Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/23 ▾
← Ground Operation, Servicing & Human Factors

Chapter 5 · Lesson 1 of 5

Fire protection on the ramp and during engine starts

1 min read

Match the agent to the fire. Carbon dioxide works mainly by displacing oxygen, with some cooling, and is used on Class A, B and C fires.

The same oxygen displacement makes it dangerous to people in a confined space, the gas is cold enough to cause frostbite, and a bottle whose seal has been punctured is spent and must be recharged and weighed.

A burning magnesium wheel is a Class D metal fire that burns hotter than the temperature at which water breaks apart, so water, and the sudden cooling from CO2, can cause a violent reaction that throws burning metal. Dry powder blankets the metal and is the correct choice.

For an engine start, the fire guard knows the starting sequence, stands outboard and near the engine, in view of the operator and clear of the propeller arc and exhaust, and holds a CO2 extinguisher of at least 5 pounds.

If an induction fire starts during a piston-engine start, keep cranking: once the engine runs, it pulls the flame into the cylinders. Only if the engine will not start is CO2 directed into the air intake.

Check yourself

1. A magnesium wheel assembly is burning after a brake fire. Which extinguishing method is correct, and why is water the wrong choice?

2. Which statement about carbon dioxide (CO2) fire extinguishers is correct?

Facts checked 2026-11-15 · Sources: FAA-S-ACS-1 Aviation Mechanic Airman Certification Standards, FAA Aircraft Handbooks and Manuals (FAA-H-8083-30B AMT Handbook, General), 14 CFR Part 43: Maintenance, Preventive Maintenance, Rebuilding, and Alteration

FAA A&P Mechanic (General) cheat sheet: every key fact on one page →