Chapters0/30 ▾
Study guide · Chapter 6 of 6
Network Troubleshooting Study Guide — CompTIA Network+
29 free practice questions
Troubleshooting is the largest Network+ domain at 24% of the exam. Questions give you counters, command output or a symptom pattern and ask for the cause, the right tool or the next step. This chapter starts with CompTIA's step-by-step method, then works through cable faults, interface counters, addressing and service failures, and wireless and voice quality problems.
Key takeaways
- If a theory is not confirmed, establish a new theory or escalate; only a confirmed theory moves on to a plan of action.
- Late collisions on one end and runts and CRC errors on the other point to a duplex mismatch.
- Output drops with zero CRC, runt and giant errors mean congestion, not a bad cable.
- A split pair passes a basic continuity test, so only a certification tester that measures crosstalk will find it.
- Steady delay with large swings in packet arrival times is jitter, and a Wi-Fi analyzer cannot see non-802.11 interference that a spectrum analyzer can.
Lessons in this chapter
5 short lessons · 5 min read
- 1The troubleshooting methodology, step by step1 min
- 2Cable faults, distance limits, PoE budgets and the right tester1 min
- 3Reading interface counters and port states1 min
- 4Addressing and service failures: masks, DHCP, duplicates, loops, ACLs, DNS1 min
- 5Wireless and voice quality problems1 min
Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 3927: Dynamic Configuration of IPv4 Link-Local Addresses
CompTIA Network+ cheat sheet: every key fact on one page →Practice questions based on the CompTIA Network+ exam domains and the published standards the exam is built on (IEEE 802.3 and 802.11, IEEE 802.1Q and 802.1X, the IANA port registry, IETF RFCs, and TIA-568 cabling). CompTIA and Network+ are marks of CompTIA; this site is not affiliated with or endorsed by CompTIA. Exam objectives are revised periodically — check the current official objectives for your exam version before testing. About the Network+ exam →