Chapters0/30 ▾
Chapter 5 · Lesson 5 of 5
Hardening, wireless authentication and physical security
1 min read
The first hardening step on any new switch, access point, router or camera is changing the default administrator credentials, because vendor defaults are published.
Then disable unused ports and services, and swap cleartext management for encrypted versions: SSH for Telnet, HTTPS for HTTP and SNMPv3 for community strings. Hiding the SSID is not a control; it only drops the name from beacons, and any wireless analyzer finds the network.
Both Wi-Fi modes encrypt the air link. The difference is what gets authenticated. Personal (PSK) mode checks only a shared passphrase, so there is no per-user record and one departure means re-keying every device.
Enterprise mode adds 802.1X and an authentication server, giving each user credentials that can be logged and revoked one at a time. MAC filtering is not identity either, since MAC addresses are easy to observe and spoof.
Physical security closes the last gap. Tailgating, also called piggybacking, is following an authorized person through a controlled door. An access control vestibule stops it by admitting one person at a time and not opening the inner door until the outer one closes and the person authenticates. Awareness training teaches staff not to hold the door.
Check yourself
1. A technician is deploying a new switch and a new wireless access point taken straight out of their boxes. Which hardening step addresses the weakness most commonly exploited on freshly installed network devices?
2. Which statement describes a structural difference between personal (pre-shared key) mode and enterprise (802.1X) mode on a wireless LAN?
Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 826: Address Resolution Protocol
CompTIA Network+ cheat sheet: every key fact on one page →