Chapters0/30 ▾
Chapter 5 · Lesson 3 of 5
Filtering and segmentation: ACLs, screened subnets and IDS
1 min read
An ACL is read from the top down and stops at the first matching line. A broad deny placed above a specific permit blocks the traffic that permit was meant to allow. Every list also ends with an invisible deny-all, never a permit-all, so anything that must pass needs its own permit.
Example: line 1 denies all TCP to 10.50.0.0/16 and line 2 permits TCP 22 to host 10.50.1.10. SSH to that host is blocked by line 1; the fix is to move the specific permit above the broad deny.
Public services such as a web server and an external DNS server belong in a screened subnet, a segment filtered from both the internet and the LAN, so a compromised server lands the attacker in an isolated zone.
Devices that cannot be patched, such as legacy SCADA controllers, go in their own tightly filtered VLAN to shrink what can reach them. To watch traffic with zero risk of delaying it, use an out-of-band IDS fed by a mirror port; an inline IPS can block but can also drop legitimate traffic when a signature misfires.
Check yourself
1. An ACL is applied inbound on a router interface with its statements in this order: (1) deny tcp any 10.10.0.0/16; (2) permit tcp any host 10.10.5.20 eq 443. Users report they cannot reach the HTTPS server at 10.10.5.20. What explains this?
2. A company must host a public web server and an externally reachable DNS server. Following standard zone design, where should these systems be placed?
Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 826: Address Resolution Protocol
CompTIA Network+ cheat sheet: every key fact on one page →