Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
  1. 1.Models, Media & Topologies0/5
    1. The OSI and TCP/IP models: layers, data units and devices
    2. Copper and fiber: categories, distances and connectors
    3. Installing cable: plenum ratings and Power over Ethernet
    4. Wireless basics: channels, bonding, antennas and identifiers
    5. Topologies and network types: domains, mesh, spine and leaf, SAN
  2. 2.IP Addressing, Subnetting & Routing0/5
    1. IPv4 subnetting with the block-size method
    2. Private, loopback and APIPA ranges, and traffic types
    3. How routers choose a path: prefix, distance, metric and summaries
    4. IPv6: shortening, address types, SLAAC and NAT64
    5. VLANs, inter-VLAN routing and NAT
  3. 3.Ports, Protocols & Services0/5
    1. Well-known ports: secure and cleartext pairs
    2. TCP and UDP: handshake, flow control and real-time traffic
    3. DNS and DHCP: transports, records, relays and reservations
    4. Time and monitoring protocols: NTP and SNMP
    5. Tunnels, IPsec and QoS markings
  4. 4.Network Operations0/5
    1. Network documentation and the device lifecycle
    2. Monitoring with baselines, SNMP and syslog
    3. Seeing traffic: flow data, TAPs, mirror ports and availability checks
    4. Disaster recovery and high availability
    5. Change management and configuration baselines
  5. 5.Network Security0/5
    1. Core security terms: CIA, risk vocabulary and zero trust
    2. Identity and access: AAA, 802.1X, RADIUS, TACACS+, MFA and RBAC
    3. Filtering and segmentation: ACLs, screened subnets and IDS
    4. Recognizing network attacks from their symptoms
    5. Hardening, wireless authentication and physical security
  6. 6.Network Troubleshooting0/5
    1. The troubleshooting methodology, step by step
    2. Cable faults, distance limits, PoE budgets and the right tester
    3. Reading interface counters and port states
    4. Addressing and service failures: masks, DHCP, duplicates, loops, ACLs, DNS
    5. Wireless and voice quality problems
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 4 of 6

Network Operations Study Guide — CompTIA Network+

29 free practice questions

Network Operations is about running a network well after it is built: knowing what you have, watching how it behaves, recovering when it fails and changing it safely. Most questions name a task and ask which document, metric or process fits it, so the skill is matching each tool to the one question it answers.

Key takeaways

  • A cable map resolves a wall jack to its patch panel and switch port, a logical diagram shows VLANs and subnets, and a rack elevation shows rack units.
  • A performance baseline is what turns a raw number such as 45% utilization into a judgment of normal or abnormal.
  • Syslog severity 0 is Emergency, the most severe, and 7 is Debug, the least.
  • RPO limits how much data you can lose and drives backup frequency; RTO limits how long you can be down.
  • A rollback plan must be written and approved before a change is implemented, not after it fails.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Network documentation and the device lifecycle1 min
  2. 2Monitoring with baselines, SNMP and syslog1 min
  3. 3Seeing traffic: flow data, TAPs, mirror ports and availability checks1 min
  4. 4Disaster recovery and high availability1 min
  5. 5Change management and configuration baselines1 min
View all questions & answers →

Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 5424: The Syslog Protocol, NIST SP 800-34 Rev. 1: Contingency Planning Guide for Federal Information Systems

CompTIA Network+ cheat sheet: every key fact on one page →Next chapter: Network Security →

Practice questions based on the CompTIA Network+ exam domains and the published standards the exam is built on (IEEE 802.3 and 802.11, IEEE 802.1Q and 802.1X, the IANA port registry, IETF RFCs, and TIA-568 cabling). CompTIA and Network+ are marks of CompTIA; this site is not affiliated with or endorsed by CompTIA. Exam objectives are revised periodically — check the current official objectives for your exam version before testing. About the Network+ exam →