Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
  1. 1.Models, Media & Topologies0/5
    1. The OSI and TCP/IP models: layers, data units and devices
    2. Copper and fiber: categories, distances and connectors
    3. Installing cable: plenum ratings and Power over Ethernet
    4. Wireless basics: channels, bonding, antennas and identifiers
    5. Topologies and network types: domains, mesh, spine and leaf, SAN
  2. 2.IP Addressing, Subnetting & Routing0/5
    1. IPv4 subnetting with the block-size method
    2. Private, loopback and APIPA ranges, and traffic types
    3. How routers choose a path: prefix, distance, metric and summaries
    4. IPv6: shortening, address types, SLAAC and NAT64
    5. VLANs, inter-VLAN routing and NAT
  3. 3.Ports, Protocols & Services0/5
    1. Well-known ports: secure and cleartext pairs
    2. TCP and UDP: handshake, flow control and real-time traffic
    3. DNS and DHCP: transports, records, relays and reservations
    4. Time and monitoring protocols: NTP and SNMP
    5. Tunnels, IPsec and QoS markings
  4. 4.Network Operations0/5
    1. Network documentation and the device lifecycle
    2. Monitoring with baselines, SNMP and syslog
    3. Seeing traffic: flow data, TAPs, mirror ports and availability checks
    4. Disaster recovery and high availability
    5. Change management and configuration baselines
  5. 5.Network Security0/5
    1. Core security terms: CIA, risk vocabulary and zero trust
    2. Identity and access: AAA, 802.1X, RADIUS, TACACS+, MFA and RBAC
    3. Filtering and segmentation: ACLs, screened subnets and IDS
    4. Recognizing network attacks from their symptoms
    5. Hardening, wireless authentication and physical security
  6. 6.Network Troubleshooting0/5
    1. The troubleshooting methodology, step by step
    2. Cable faults, distance limits, PoE budgets and the right tester
    3. Reading interface counters and port states
    4. Addressing and service failures: masks, DHCP, duplicates, loops, ACLs, DNS
    5. Wireless and voice quality problems
Saved in this browser. Move it to another device →
← Network Security

Chapter 5 · Lesson 1 of 5

Core security terms: CIA, risk vocabulary and zero trust

1 min read

The CIA triad names three goals. Confidentiality keeps data secret, mainly through encryption and access control. Integrity proves data was not changed, which is what a published hash does: change one bit of a firmware file and the hash no longer matches. Availability keeps systems usable through redundancy, backups and denial-of-service protection. Accounting belongs to AAA, not to the triad.

TermMeaning
VulnerabilityThe weakness itself, such as unpatched firmware
ThreatThe actor or event that could use the weakness
ExploitThe specific technique or code that uses it
RiskLikelihood of exploitation combined with its impact

Zero trust drops the idea that being inside the firewall earns trust. Every request is authenticated and authorized using identity, device posture and policy, access is least privilege, and trust is checked again continuously. The old perimeter model trusted everything inside, which let an attacker with one foothold move sideways. A private RFC 1918 address proves nothing about trust.

Check yourself

1. A router is running firmware that contains an unpatched flaw in its web management interface. Using standard security terminology, what does the unpatched flaw itself represent?

2. Which statement best describes zero trust architecture compared with a traditional perimeter model?

Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 826: Address Resolution Protocol

CompTIA Network+ cheat sheet: every key fact on one page →