Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
  1. 1.Models, Media & Topologies0/5
    1. The OSI and TCP/IP models: layers, data units and devices
    2. Copper and fiber: categories, distances and connectors
    3. Installing cable: plenum ratings and Power over Ethernet
    4. Wireless basics: channels, bonding, antennas and identifiers
    5. Topologies and network types: domains, mesh, spine and leaf, SAN
  2. 2.IP Addressing, Subnetting & Routing0/5
    1. IPv4 subnetting with the block-size method
    2. Private, loopback and APIPA ranges, and traffic types
    3. How routers choose a path: prefix, distance, metric and summaries
    4. IPv6: shortening, address types, SLAAC and NAT64
    5. VLANs, inter-VLAN routing and NAT
  3. 3.Ports, Protocols & Services0/5
    1. Well-known ports: secure and cleartext pairs
    2. TCP and UDP: handshake, flow control and real-time traffic
    3. DNS and DHCP: transports, records, relays and reservations
    4. Time and monitoring protocols: NTP and SNMP
    5. Tunnels, IPsec and QoS markings
  4. 4.Network Operations0/5
    1. Network documentation and the device lifecycle
    2. Monitoring with baselines, SNMP and syslog
    3. Seeing traffic: flow data, TAPs, mirror ports and availability checks
    4. Disaster recovery and high availability
    5. Change management and configuration baselines
  5. 5.Network Security0/5
    1. Core security terms: CIA, risk vocabulary and zero trust
    2. Identity and access: AAA, 802.1X, RADIUS, TACACS+, MFA and RBAC
    3. Filtering and segmentation: ACLs, screened subnets and IDS
    4. Recognizing network attacks from their symptoms
    5. Hardening, wireless authentication and physical security
  6. 6.Network Troubleshooting0/5
    1. The troubleshooting methodology, step by step
    2. Cable faults, distance limits, PoE budgets and the right tester
    3. Reading interface counters and port states
    4. Addressing and service failures: masks, DHCP, duplicates, loops, ACLs, DNS
    5. Wireless and voice quality problems
Saved in this browser. Move it to another device →
← Back

Study guide · Chapter 2 of 6

IP Addressing, Subnetting & Routing Study Guide — CompTIA Network+

21 free practice questions

Addressing questions on Network+ are mostly short calculations and lookups: find the subnet, pick the mask, choose the route, read an IPv6 address. This chapter gives you one repeatable method for subnetting, then covers special IPv4 ranges, how routers choose a path, IPv6 rules, and how VLANs and NAT fit around addressing.

Key takeaways

  • Block size is 256 minus the interesting mask octet; the network address is the block boundary at or below the host and the broadcast is one less than the next boundary.
  • Usable hosts equal 2 to the power of the host bits minus 2, so a /26 gives 62, not 64.
  • A router picks the longest matching prefix first; administrative distance and metric only matter after that.
  • An IPv6 address may use the double colon only once, and fe80::/10 addresses are link-local and never routed.
  • PAT lets many inside hosts share one public IPv4 address by rewriting source ports, while port forwarding publishes one inside service.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1IPv4 subnetting with the block-size method1 min
  2. 2Private, loopback and APIPA ranges, and traffic types1 min
  3. 3How routers choose a path: prefix, distance, metric and summaries1 min
  4. 4IPv6: shortening, address types, SLAAC and NAT641 min
  5. 5VLANs, inter-VLAN routing and NAT1 min
View all questions & answers →

Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 1918: Address Allocation for Private Internets, RFC 4291: IP Version 6 Addressing Architecture

CompTIA Network+ cheat sheet: every key fact on one page →Next chapter: Ports, Protocols & Services →

Practice questions based on the CompTIA Network+ exam domains and the published standards the exam is built on (IEEE 802.3 and 802.11, IEEE 802.1Q and 802.1X, the IANA port registry, IETF RFCs, and TIA-568 cabling). CompTIA and Network+ are marks of CompTIA; this site is not affiliated with or endorsed by CompTIA. Exam objectives are revised periodically — check the current official objectives for your exam version before testing. About the Network+ exam →