Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
  1. 1.Models, Media & Topologies0/5
    1. The OSI and TCP/IP models: layers, data units and devices
    2. Copper and fiber: categories, distances and connectors
    3. Installing cable: plenum ratings and Power over Ethernet
    4. Wireless basics: channels, bonding, antennas and identifiers
    5. Topologies and network types: domains, mesh, spine and leaf, SAN
  2. 2.IP Addressing, Subnetting & Routing0/5
    1. IPv4 subnetting with the block-size method
    2. Private, loopback and APIPA ranges, and traffic types
    3. How routers choose a path: prefix, distance, metric and summaries
    4. IPv6: shortening, address types, SLAAC and NAT64
    5. VLANs, inter-VLAN routing and NAT
  3. 3.Ports, Protocols & Services0/5
    1. Well-known ports: secure and cleartext pairs
    2. TCP and UDP: handshake, flow control and real-time traffic
    3. DNS and DHCP: transports, records, relays and reservations
    4. Time and monitoring protocols: NTP and SNMP
    5. Tunnels, IPsec and QoS markings
  4. 4.Network Operations0/5
    1. Network documentation and the device lifecycle
    2. Monitoring with baselines, SNMP and syslog
    3. Seeing traffic: flow data, TAPs, mirror ports and availability checks
    4. Disaster recovery and high availability
    5. Change management and configuration baselines
  5. 5.Network Security0/5
    1. Core security terms: CIA, risk vocabulary and zero trust
    2. Identity and access: AAA, 802.1X, RADIUS, TACACS+, MFA and RBAC
    3. Filtering and segmentation: ACLs, screened subnets and IDS
    4. Recognizing network attacks from their symptoms
    5. Hardening, wireless authentication and physical security
  6. 6.Network Troubleshooting0/5
    1. The troubleshooting methodology, step by step
    2. Cable faults, distance limits, PoE budgets and the right tester
    3. Reading interface counters and port states
    4. Addressing and service failures: masks, DHCP, duplicates, loops, ACLs, DNS
    5. Wireless and voice quality problems
Saved in this browser. Move it to another device →
← Network Troubleshooting

Chapter 6 · Lesson 1 of 5

The troubleshooting methodology, step by step

1 min read

CompTIA tests the order of its troubleshooting steps directly. Most questions describe what a technician just finished and ask what comes next, so learn both the order and what belongs inside each step.

  • 1. Identify the problem: question users, find out what changed, duplicate the problem.
  • 2. Establish a theory of probable cause, starting by questioning the obvious.
  • 3. Test the theory. If it is confirmed, decide the next steps; if not, form a new theory or escalate.
  • 4. Establish a plan of action, including the potential effects of the fix.
  • 5. Implement the solution or escalate as necessary.
  • 6. Verify full system functionality and, if applicable, implement preventive measures.
  • 7. Document findings, actions, outcomes and lessons learned.

Example: after replacing a failed transceiver, the port shows link and a ping to the server works. That proves Layers 1 to 3 only. Step 6 still requires confirming with the user that the application they reported now works, before you document and close.

Check yourself

1. A technician theorizes that a user's intermittent connectivity is caused by a failing patch cable. After swapping in a known-good cable, the symptoms are exactly the same. What is the appropriate next action?

2. A technician replaces a failed fiber transceiver. The switch port now shows link and the technician can ping the server from the switch. According to the methodology, what must happen BEFORE documenting the findings and actions?

Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 3927: Dynamic Configuration of IPv4 Link-Local Addresses

CompTIA Network+ cheat sheet: every key fact on one page →