Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
  1. 1.Models, Media & Topologies0/5
    1. The OSI and TCP/IP models: layers, data units and devices
    2. Copper and fiber: categories, distances and connectors
    3. Installing cable: plenum ratings and Power over Ethernet
    4. Wireless basics: channels, bonding, antennas and identifiers
    5. Topologies and network types: domains, mesh, spine and leaf, SAN
  2. 2.IP Addressing, Subnetting & Routing0/5
    1. IPv4 subnetting with the block-size method
    2. Private, loopback and APIPA ranges, and traffic types
    3. How routers choose a path: prefix, distance, metric and summaries
    4. IPv6: shortening, address types, SLAAC and NAT64
    5. VLANs, inter-VLAN routing and NAT
  3. 3.Ports, Protocols & Services0/5
    1. Well-known ports: secure and cleartext pairs
    2. TCP and UDP: handshake, flow control and real-time traffic
    3. DNS and DHCP: transports, records, relays and reservations
    4. Time and monitoring protocols: NTP and SNMP
    5. Tunnels, IPsec and QoS markings
  4. 4.Network Operations0/5
    1. Network documentation and the device lifecycle
    2. Monitoring with baselines, SNMP and syslog
    3. Seeing traffic: flow data, TAPs, mirror ports and availability checks
    4. Disaster recovery and high availability
    5. Change management and configuration baselines
  5. 5.Network Security0/5
    1. Core security terms: CIA, risk vocabulary and zero trust
    2. Identity and access: AAA, 802.1X, RADIUS, TACACS+, MFA and RBAC
    3. Filtering and segmentation: ACLs, screened subnets and IDS
    4. Recognizing network attacks from their symptoms
    5. Hardening, wireless authentication and physical security
  6. 6.Network Troubleshooting0/5
    1. The troubleshooting methodology, step by step
    2. Cable faults, distance limits, PoE budgets and the right tester
    3. Reading interface counters and port states
    4. Addressing and service failures: masks, DHCP, duplicates, loops, ACLs, DNS
    5. Wireless and voice quality problems
Saved in this browser. Move it to another device →
← Ports, Protocols & Services

Chapter 3 · Lesson 1 of 5

Well-known ports: secure and cleartext pairs

1 min read

JobCleartext or basicSecure or preferred
Remote command lineTelnet TCP 23SSH TCP 22
File transferFTP TCP 21, TFTP UDP 69SFTP inside SSH on TCP 22; FTPS is FTP over TLS (AUTH TLS on 21, or implicit on 990)
DirectoryLDAP TCP 389 (TLS only via StartTLS)LDAPS TCP 636
Sending mailSMTP TCP 25, server to serverSubmission TCP 587, client with login
Reading mailPOP3 TCP 110, downloads to one deviceIMAP TCP 143, synced on the server
LoggingSyslog UDP 514TCP 514 is the old remote shell, not syslog

Read each scenario for the deciding word. A request for LDAP that is wrapped in TLS from the first byte means 636, because 389 carries TLS only when the client upgrades with StartTLS.

A user who reads mail on a laptop and a phone and wants folders and read status to match needs IMAP. An admin who wants encrypted file copies over the port already open for management needs SFTP on 22.

Check yourself

1. A firewall change request asks you to permit directory service lookups between an application server and a domain controller over a session that is wrapped in TLS from the moment it opens, not upgraded in band with StartTLS. Which destination port must the rule allow?

2. An administrator must copy configuration files to a server over an encrypted channel and wants the transfer to reuse the same service and port already open for command-line administration. Which protocol and port meet this requirement?

Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, IANA Service Name and Transport Protocol Port Number Registry, RFC 7766: DNS Transport over TCP

CompTIA Network+ cheat sheet: every key fact on one page →