Chapters0/30 ▾
Study guide · Chapter 1 of 6
Models, Media & Topologies Study Guide — CompTIA Network+
29 free practice questions
This chapter covers the foundations that the Network+ exam keeps coming back to: the OSI and TCP/IP models, copper and fiber media, Power over Ethernet, 802.11 radio basics and the shapes networks are built in. Questions usually describe a job, such as a 90-meter run or a link between two buildings, and ask which medium, layer or design fits and why.
Key takeaways
- Data is called a segment at the Transport layer, a packet at the Network layer and a frame at the Data Link layer.
- 10GBASE-T runs about 55 m on Category 6 but the full 100 m channel on Category 6a.
- Single-mode fiber reaches much farther than multimode because its tiny core carries one mode and avoids modal dispersion.
- In 2.4 GHz, only channels five numbers apart, such as 1, 6 and 11, avoid overlapping.
- Each switch port is its own collision domain, while all ports in one VLAN share one broadcast domain.
Lessons in this chapter
5 short lessons · 5 min read
- 1The OSI and TCP/IP models: layers, data units and devices1 min
- 2Copper and fiber: categories, distances and connectors1 min
- 3Installing cable: plenum ratings and Power over Ethernet1 min
- 4Wireless basics: channels, bonding, antennas and identifiers1 min
- 5Topologies and network types: domains, mesh, spine and leaf, SAN1 min
Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 1122: Requirements for Internet Hosts (TCP/IP layering)
CompTIA Network+ cheat sheet: every key fact on one page →Next chapter: IP Addressing, Subnetting & Routing →Practice questions based on the CompTIA Network+ exam domains and the published standards the exam is built on (IEEE 802.3 and 802.11, IEEE 802.1Q and 802.1X, the IANA port registry, IETF RFCs, and TIA-568 cabling). CompTIA and Network+ are marks of CompTIA; this site is not affiliated with or endorsed by CompTIA. Exam objectives are revised periodically — check the current official objectives for your exam version before testing. About the Network+ exam →