Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
  1. 1.Models, Media & Topologies0/5
    1. The OSI and TCP/IP models: layers, data units and devices
    2. Copper and fiber: categories, distances and connectors
    3. Installing cable: plenum ratings and Power over Ethernet
    4. Wireless basics: channels, bonding, antennas and identifiers
    5. Topologies and network types: domains, mesh, spine and leaf, SAN
  2. 2.IP Addressing, Subnetting & Routing0/5
    1. IPv4 subnetting with the block-size method
    2. Private, loopback and APIPA ranges, and traffic types
    3. How routers choose a path: prefix, distance, metric and summaries
    4. IPv6: shortening, address types, SLAAC and NAT64
    5. VLANs, inter-VLAN routing and NAT
  3. 3.Ports, Protocols & Services0/5
    1. Well-known ports: secure and cleartext pairs
    2. TCP and UDP: handshake, flow control and real-time traffic
    3. DNS and DHCP: transports, records, relays and reservations
    4. Time and monitoring protocols: NTP and SNMP
    5. Tunnels, IPsec and QoS markings
  4. 4.Network Operations0/5
    1. Network documentation and the device lifecycle
    2. Monitoring with baselines, SNMP and syslog
    3. Seeing traffic: flow data, TAPs, mirror ports and availability checks
    4. Disaster recovery and high availability
    5. Change management and configuration baselines
  5. 5.Network Security0/5
    1. Core security terms: CIA, risk vocabulary and zero trust
    2. Identity and access: AAA, 802.1X, RADIUS, TACACS+, MFA and RBAC
    3. Filtering and segmentation: ACLs, screened subnets and IDS
    4. Recognizing network attacks from their symptoms
    5. Hardening, wireless authentication and physical security
  6. 6.Network Troubleshooting0/5
    1. The troubleshooting methodology, step by step
    2. Cable faults, distance limits, PoE budgets and the right tester
    3. Reading interface counters and port states
    4. Addressing and service failures: masks, DHCP, duplicates, loops, ACLs, DNS
    5. Wireless and voice quality problems
Saved in this browser. Move it to another device →
← Models, Media & Topologies

Chapter 1 · Lesson 1 of 5

The OSI and TCP/IP models: layers, data units and devices

1 min read

The OSI model has seven layers. As data moves down the stack, each layer adds its own header and gives the unit a new name. Learn the names, because the exam asks for them directly.

OSI layerData unitTCP/IP layer
5-7 Session, Presentation, ApplicationDataApplication
4 TransportSegment (TCP) or datagram (UDP)Transport
3 NetworkPacketInternet
2 Data LinkFrameLink
1 PhysicalBitsLink

A device works at the highest layer it has to read to make its decision.

A load balancer that only looks at IP addresses and TCP or UDP ports is Layer 4. If it must read a URL path, such as sending /video requests to one pool and /login requests to another, it has to open the HTTP request, which makes it Layer 7. Placement matters too: an IDS fed by a mirror (SPAN) port sees only a copy, so it can alert but never block, while an IPS sits inline and can drop traffic.

Check yourself

1. As data from a TCP-based application is passed down the stack, what is the protocol data unit called at the Transport layer, and what is it called at the Network layer immediately below it?

2. The OSI model defines separate Session, Presentation and Application layers. How are those three sets of functions represented in the four-layer TCP/IP model?

Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 1122: Requirements for Internet Hosts (TCP/IP layering)

CompTIA Network+ cheat sheet: every key fact on one page →