Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/30 ▾
  1. 1.Models, Media & Topologies0/5
    1. The OSI and TCP/IP models: layers, data units and devices
    2. Copper and fiber: categories, distances and connectors
    3. Installing cable: plenum ratings and Power over Ethernet
    4. Wireless basics: channels, bonding, antennas and identifiers
    5. Topologies and network types: domains, mesh, spine and leaf, SAN
  2. 2.IP Addressing, Subnetting & Routing0/5
    1. IPv4 subnetting with the block-size method
    2. Private, loopback and APIPA ranges, and traffic types
    3. How routers choose a path: prefix, distance, metric and summaries
    4. IPv6: shortening, address types, SLAAC and NAT64
    5. VLANs, inter-VLAN routing and NAT
  3. 3.Ports, Protocols & Services0/5
    1. Well-known ports: secure and cleartext pairs
    2. TCP and UDP: handshake, flow control and real-time traffic
    3. DNS and DHCP: transports, records, relays and reservations
    4. Time and monitoring protocols: NTP and SNMP
    5. Tunnels, IPsec and QoS markings
  4. 4.Network Operations0/5
    1. Network documentation and the device lifecycle
    2. Monitoring with baselines, SNMP and syslog
    3. Seeing traffic: flow data, TAPs, mirror ports and availability checks
    4. Disaster recovery and high availability
    5. Change management and configuration baselines
  5. 5.Network Security0/5
    1. Core security terms: CIA, risk vocabulary and zero trust
    2. Identity and access: AAA, 802.1X, RADIUS, TACACS+, MFA and RBAC
    3. Filtering and segmentation: ACLs, screened subnets and IDS
    4. Recognizing network attacks from their symptoms
    5. Hardening, wireless authentication and physical security
  6. 6.Network Troubleshooting0/5
    1. The troubleshooting methodology, step by step
    2. Cable faults, distance limits, PoE budgets and the right tester
    3. Reading interface counters and port states
    4. Addressing and service failures: masks, DHCP, duplicates, loops, ACLs, DNS
    5. Wireless and voice quality problems
Saved in this browser. Move it to another device →
← Network Security

Chapter 5 · Lesson 2 of 5

Identity and access: AAA, 802.1X, RADIUS, TACACS+, MFA and RBAC

1 min read

AAA splits access into three steps. Authentication proves who you are, authorization decides what you may do, and accounting records what you actually did, such as login time and commands entered. A server log showing which technician typed which commands on a switch is accounting.

  • 802.1X roles: the supplicant asks for access, the authenticator (switch port or AP) passes only EAPOL until the server says yes, and the authentication server, usually RADIUS, decides.
  • TACACS+ encrypts the whole payload and separates the three AAA functions, so it suits command-by-command device administration. RADIUS is the open standard on UDP, protects only the password and combines authentication with authorization, so it suits network access such as Wi-Fi, VPN and 802.1X.
  • MFA needs different categories: something you know, have or are. A password plus a security question is two of the same kind.
  • Role-based access control gives rights to a role, so a new hire added to the help desk group gets exactly that job's rights.

Check yourself

1. Which statement correctly distinguishes TACACS+ from RADIUS?

2. A centralized server records which technician logged in to a switch, at what time, and which configuration commands were entered. Which element of AAA does this record represent?

Facts checked 2026-11-16 · Sources: CompTIA Network+ certification overview, RFC 826: Address Resolution Protocol

CompTIA Network+ cheat sheet: every key fact on one page →