Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/26 ▾
← Back

Study guide · Chapter 1 of 7

A1 — Engine Repair Study Guide — ASE Automotive Technician

28 free practice questions

The A1 Engine Repair certification test has 45 scored questions plus 10 unscored research questions, with 75 minutes to answer them. General Engine Diagnosis is the largest area at 18 of the 45 scored questions, so reading test results matters more than memorizing specifications. ASE emails a detailed score report when the appointment ends, and results usually appear in myASE within 24 hours.

Key takeaways

  • If a low cylinder's compression rises sharply on the wet test, the leak is at the rings or cylinder wall, not a valve or head gasket.
  • On a leakage test the place where air escapes names the leak: tailpipe means exhaust valve, intake means intake valve, oil fill means rings, coolant bubbles mean head gasket or crack.
  • A pressure cap raises the coolant boiling point by roughly 3 °F per psi, so a weak cap causes boil-over under heavy load.
  • Torque-to-yield head bolts are replaced, tightened in stages from the center outward, and finished with a specified angle.
  • On a Technician A and B question, judge each statement on its own, and remember that both or neither can be the answer.

Lessons in this chapter

4 short lessons · 4 min read

  1. 1Compression and cylinder leakage tests1 min
  2. 2Locating engine noises1 min
  3. 3Lubrication and cooling system diagnosis1 min
  4. 4Cylinder head, valve train and block measurements1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: ASE: Official Automobile Study Guide (A1 Engine Repair test specifications and task list), ASE: Automobile and Light Truck (A1-A9) tests

ASE Automotive Technician cheat sheet: every key fact on one page →Next chapter: A5 — Brakes →

Practice questions written to the ASE Automobile & Light Truck (A-series) task lists and standard automotive service principles. ASE is a mark of the National Institute for Automotive Service Excellence; this site is not affiliated with or endorsed by ASE. Always follow the vehicle manufacturer's service information for specifications and procedures on a real repair. About the ASE tests →