Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/26 ▾
← Back

Study guide · Chapter 3 of 7

A6 — Electrical / Electronic Systems Study Guide — ASE Automotive Technician

22 free practice questions

The A6 Electrical/Electronic Systems certification test has 50 scored questions plus 10 unscored research questions, with 90 minutes. Body electrical systems are the largest area at 17 questions, and general electrical diagnosis is next at 13. Nearly every question comes back to Ohm's law and to reading a meter in the right place with the circuit working.

Key takeaways

  • In a series circuit current is the same everywhere and the largest resistance drops the most voltage; in parallel every branch gets full voltage and adding a branch raises total current.
  • Voltage drop is measured with the circuit loaded, because a few thousandths of an ohm that an ohmmeter misses can waste most of a volt at starter current.
  • A loaded charging circuit should lose only about 0.2 to 0.5 V between the generator output and the battery positive, so 0.7 V is excessive.
  • A rested battery reads about 12.6 V when full and about 12.2 V at half charge, and it must be fully charged before a load test means anything.
  • Never connect an ohmmeter to an airbag deployment loop, because its test current can fire the inflator.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1Ohm's law, series and parallel circuits1 min
  2. 2Voltage drop, shorts and parasitic draw1 min
  3. 3Battery, starting and charging systems1 min
  4. 4Lighting system diagnosis1 min
  5. 5Body electrical, airbags and networked modules1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: ASE: Official Automobile Study Guide (A6 Electrical/Electronic Systems test specifications and task list), ASE: Automobile and Light Truck (A1-A9) tests

ASE Automotive Technician cheat sheet: every key fact on one page →Next chapter: A4 — Suspension & Steering →

Practice questions written to the ASE Automobile & Light Truck (A-series) task lists and standard automotive service principles. ASE is a mark of the National Institute for Automotive Service Excellence; this site is not affiliated with or endorsed by ASE. Always follow the vehicle manufacturer's service information for specifications and procedures on a real repair. About the ASE tests →