Chapters0/26 ▾
Study guide · Chapter 2 of 7
A5 — Brakes Study Guide — ASE Automotive Technician
22 free practice questions
The A5 Brakes certification test has 45 scored questions plus 10 unscored research questions in 75 minutes. Hydraulic, power assist and parking brake systems make up the largest area at 19 questions, followed by disc brakes, electronic brake controls (ABS, traction control and stability control), and drum brakes. Most questions describe a pedal feel, a noise or a pull and ask which part explains it.
Key takeaways
- A pedal that slowly sinks with no external leak and a normal fluid level points to fluid bypassing the master cylinder piston cups.
- Brake lines are replaced with steel tubing or approved copper-nickel tubing using double or ISO flares, never plain copper, aluminum, compression fittings or brazed patches.
- Brake pulsation is measured as rotor thickness variation with a micrometer, while lateral runout is read with a dial indicator.
- The thickness cast into a rotor is the discard limit, so a rotor below it is replaced.
- An amber ABS lamp alone means antilock is disabled but base braking still works; the red BRAKE lamp signals a base-system concern.
Lessons in this chapter
4 short lessons · 4 min read
- 1Master cylinder, brake lines and brake fluid1 min
- 2Brake valves, power boosters and electric parking brakes1 min
- 3Drum and disc brake service1 min
- 4ABS, traction control and stability control1 min
Facts checked 2026-11-15 · Sources: ASE: Official Automobile Study Guide (A5 Brakes test specifications and task list), ASE: Automobile and Light Truck (A1-A9) tests
ASE Automotive Technician cheat sheet: every key fact on one page →Next chapter: A6 — Electrical / Electronic Systems →Practice questions written to the ASE Automobile & Light Truck (A-series) task lists and standard automotive service principles. ASE is a mark of the National Institute for Automotive Service Excellence; this site is not affiliated with or endorsed by ASE. Always follow the vehicle manufacturer's service information for specifications and procedures on a real repair. About the ASE tests →