Chapters0/41 ▾
- 1.Department Operations & Safety0/5
- 2.Decontamination & Cleaning0/5
- 3.Sterilization Methods0/5
- 4.Packaging & Sterile Storage0/4
- 5.Quality Assurance & Monitoring0/5
- 6.Infection Prevention0/5
- 7.Storage, Inventory & Distribution0/4
- 8.Patient Care Equipment0/4
- 9.Professional Skills & Terminology0/4
Chapter 3 · Lesson 5 of 5
Loading, wet packs, cooling and low-temperature methods
1 min read
Condensate runs downward, and that one fact drives most loading rules. In a mixed steam load, metal trays go on the bottom and textile packs above them, so metal does not drip onto porous goods.
Basins and solid-bottom containers are tilted on edge so water runs out, peel pouches stand on edge, and every item has space around it so steam can circulate.
A wet pack is contaminated, because a damp barrier wicks organisms through to the contents. It cannot be dried, re-taped or used. If one sterilizer makes wet packs and another does not with the same trays, suspect the steam supply to that machine carrying too much water.
After the cycle, loads cool undisturbed on a rack away from vents and cold surfaces; cold air blowing on hot packs drives condensation inside the wrapper.
- Ethylene oxide: aeration must finish before handling, because devices and packaging absorb the toxic gas. Killing happens during exposure; aeration only removes residue.
- Hydrogen peroxide: the item must be completely dry, and lumen length and bore must fall within the device and sterilizer IFU claims.
Check yourself
1. A heat-sensitive device is processed with ethylene oxide. Why must the aeration phase be completed before the item is handled or issued?
2. A mixed steam load holds wrapped metal instrument trays, textile packs, basins and peel pouches. How should the chamber be loaded?
Facts checked 2026-11-15 · Sources: HSPA: Certified Registered Central Service Technician (CRCST) exam content outline, CDC/HICPAC: Guideline for Disinfection and Sterilization in Healthcare Facilities
Sterile Processing (CRCST) cheat sheet: every key fact on one page →