Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/41 ▾
  1. 1.Department Operations & Safety0/5
    1. The work environment: pressure, humidity, cleaning and workflow
    2. Attire, jewelry and traffic control
    3. Workplace safety: spills, chemicals and safe lifting
    4. Regulators, standards and the order of authority
    5. Training records, documentation and quality improvement tools
  2. 2.Decontamination & Cleaning0/5
    1. Point-of-use treatment and safe transport
    2. The decontamination room and personal protective equipment
    3. Manual cleaning: water, brushes and detergent
    4. Ultrasonic cleaners and washer-disinfectors
    5. Flexible endoscopes and automated reprocessors
  3. 3.Sterilization Methods0/5
    1. How steam kills and how air is removed
    2. The daily air-removal (Bowie-Dick) test
    3. Physical, chemical and biological monitoring
    4. Release decisions: requalification, implants and immediate use
    5. Loading, wet packs, cooling and low-temperature methods
  4. 4.Packaging & Sterile Storage0/4
    1. Inspecting and assembling instruments
    2. Wraps and wrapping techniques
    3. Peel pouches, rigid containers and labels
    4. Cooling, wet packs and sterile storage
  5. 5.Quality Assurance & Monitoring0/5
    1. Sterilizer records, lot control and traceability
    2. Releasing a load and handling implants
    3. Positive biological indicators, recalls and failure reports
    4. Shelf life, stock rotation and package inspection
    5. Instructions for use, loaners, competency and quality benchmarks
  6. 6.Infection Prevention0/5
    1. The chain of infection, Standard Precautions and hand hygiene
    2. Decontamination design, airflow and safe transport
    3. Sharps, PPE and exposure incidents
    4. The Spaulding classification and high-level disinfection
    5. Microbial resistance, soil, biofilm and prions
  7. 7.Storage, Inventory & Distribution0/4
    1. Replenishment systems and ordering
    2. Receiving in the break-out area
    3. Sterile storage, rotation and transport
    4. Tracking, recalls and inventory problems
  8. 8.Patient Care Equipment0/4
    1. Why patient care equipment is noncritical
    2. Cleaning, contact time and a clean work area
    3. Inspection and removal from service
    4. Preparing, storing, distributing and tracking
  9. 9.Professional Skills & Terminology0/4
    1. Procedure suffixes: what the surgeon will do
    2. Body-part roots and putting words together
    3. Protecting patient information under HIPAA
    4. Professional communication and teamwork
Saved in this browser. Move it to another device →
← Quality Assurance & Monitoring

Chapter 5 · Lesson 1 of 5

Sterilizer records, lot control and traceability

1 min read

Two kinds of documentation work together. Each package carries a lot (load) control identifier that links it to the sterilizer, the cycle and the date. Separately, the sterilizer record for each cycle lets anyone reconstruct that load after the fact.

Ideally the identifier is also recorded at the point of use, so a device can be traced to the patient it was used on. The label proves only where and when an item was processed. It does not prove the item is sterile.

RecordWhat it holds
Lot control label on each packageSterilizer, cycle number and date
Sterilizer record for each cycleLoad number, contents, exposure time and temperature, operator, and the biological, Bowie-Dick and chemical indicator results

Example: a tray is about to be issued, but the cycle record has no operator initials and no process challenge device result. The tray is held and the supervisor is told, because the record cannot show the release criteria were met.

Filling in entries from memory is never acceptable, and neither is having the operator initial it later in the shift. Retention is another common question: no single national period exists. Each facility sets it in policy based on state, federal and accrediting requirements, because these are legal records.

Check yourself

1. Which set of information must be documented in the sterilizer record for each sterilization cycle?

2. A technician about to issue a tray finds that the load record for that cycle has no operator initials and no entry for the process challenge device result. What is correct?

Facts checked 2026-11-15 · Sources: HSPA: Certified Registered Central Service Technician (CRCST), CDC: Guideline for Disinfection and Sterilization in Healthcare Facilities (2008)

Sterile Processing (CRCST) cheat sheet: every key fact on one page →