Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/41 ▾
  1. 1.Department Operations & Safety0/5
    1. The work environment: pressure, humidity, cleaning and workflow
    2. Attire, jewelry and traffic control
    3. Workplace safety: spills, chemicals and safe lifting
    4. Regulators, standards and the order of authority
    5. Training records, documentation and quality improvement tools
  2. 2.Decontamination & Cleaning0/5
    1. Point-of-use treatment and safe transport
    2. The decontamination room and personal protective equipment
    3. Manual cleaning: water, brushes and detergent
    4. Ultrasonic cleaners and washer-disinfectors
    5. Flexible endoscopes and automated reprocessors
  3. 3.Sterilization Methods0/5
    1. How steam kills and how air is removed
    2. The daily air-removal (Bowie-Dick) test
    3. Physical, chemical and biological monitoring
    4. Release decisions: requalification, implants and immediate use
    5. Loading, wet packs, cooling and low-temperature methods
  4. 4.Packaging & Sterile Storage0/4
    1. Inspecting and assembling instruments
    2. Wraps and wrapping techniques
    3. Peel pouches, rigid containers and labels
    4. Cooling, wet packs and sterile storage
  5. 5.Quality Assurance & Monitoring0/5
    1. Sterilizer records, lot control and traceability
    2. Releasing a load and handling implants
    3. Positive biological indicators, recalls and failure reports
    4. Shelf life, stock rotation and package inspection
    5. Instructions for use, loaners, competency and quality benchmarks
  6. 6.Infection Prevention0/5
    1. The chain of infection, Standard Precautions and hand hygiene
    2. Decontamination design, airflow and safe transport
    3. Sharps, PPE and exposure incidents
    4. The Spaulding classification and high-level disinfection
    5. Microbial resistance, soil, biofilm and prions
  7. 7.Storage, Inventory & Distribution0/4
    1. Replenishment systems and ordering
    2. Receiving in the break-out area
    3. Sterile storage, rotation and transport
    4. Tracking, recalls and inventory problems
  8. 8.Patient Care Equipment0/4
    1. Why patient care equipment is noncritical
    2. Cleaning, contact time and a clean work area
    3. Inspection and removal from service
    4. Preparing, storing, distributing and tracking
  9. 9.Professional Skills & Terminology0/4
    1. Procedure suffixes: what the surgeon will do
    2. Body-part roots and putting words together
    3. Protecting patient information under HIPAA
    4. Professional communication and teamwork
Saved in this browser. Move it to another device →
← Storage, Inventory & Distribution

Chapter 7 · Lesson 3 of 4

Sterile storage, rotation and transport

1 min read

The longer a sterile item sits in storage, the more handling and dust it is exposed to, and the more likely it is to expire or be damaged. First in, first out rotation exists to stop items from outdating on the shelf.

The rule that matters is the expiration date, not the arrival order: if a new delivery carries an earlier date than the stock already on the shelf, it goes in front. Packs on hard-to-reach shelves tend to be skipped, so they are the ones most likely to outdate.

  • Do not stack sterile packages unless the item and packaging IFU specifically allow it, because weight can crush a package and break its barrier.
  • Move several packages on a cart with a solid bottom shelf, placed loosely but securely, with nothing hanging over the edge.
  • For off-site delivery, never use a car trunk, where temperature and humidity cannot be controlled.
  • Never leave sterile items unattended in an unsecured area or in a vehicle that is switched off.

Example: the shelf holds trays dated March 10 and a new delivery is dated March 4. The March 4 trays go in front so they are issued first, even though they arrived last. Putting them behind the current stock because they are the newest is the classic wrong answer.

Check yourself

1. A new delivery of a commercially sterile item carries an expiration date earlier than the same item already on the shelf. How should the technician place it?

2. A technician needs to move several sterile packages from the break-out room to sterile storage in one trip. Which method follows sterile handling practice?

Facts checked 2026-11-15 · Sources: HSPA: CRCST certification and exam content outline, CDC/HICPAC: Guideline for Disinfection and Sterilization in Healthcare Facilities, FDA: Recalls, Corrections and Removals (Devices)

Sterile Processing (CRCST) cheat sheet: every key fact on one page →