Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/41 ▾
  1. 1.Department Operations & Safety0/5
    1. The work environment: pressure, humidity, cleaning and workflow
    2. Attire, jewelry and traffic control
    3. Workplace safety: spills, chemicals and safe lifting
    4. Regulators, standards and the order of authority
    5. Training records, documentation and quality improvement tools
  2. 2.Decontamination & Cleaning0/5
    1. Point-of-use treatment and safe transport
    2. The decontamination room and personal protective equipment
    3. Manual cleaning: water, brushes and detergent
    4. Ultrasonic cleaners and washer-disinfectors
    5. Flexible endoscopes and automated reprocessors
  3. 3.Sterilization Methods0/5
    1. How steam kills and how air is removed
    2. The daily air-removal (Bowie-Dick) test
    3. Physical, chemical and biological monitoring
    4. Release decisions: requalification, implants and immediate use
    5. Loading, wet packs, cooling and low-temperature methods
  4. 4.Packaging & Sterile Storage0/4
    1. Inspecting and assembling instruments
    2. Wraps and wrapping techniques
    3. Peel pouches, rigid containers and labels
    4. Cooling, wet packs and sterile storage
  5. 5.Quality Assurance & Monitoring0/5
    1. Sterilizer records, lot control and traceability
    2. Releasing a load and handling implants
    3. Positive biological indicators, recalls and failure reports
    4. Shelf life, stock rotation and package inspection
    5. Instructions for use, loaners, competency and quality benchmarks
  6. 6.Infection Prevention0/5
    1. The chain of infection, Standard Precautions and hand hygiene
    2. Decontamination design, airflow and safe transport
    3. Sharps, PPE and exposure incidents
    4. The Spaulding classification and high-level disinfection
    5. Microbial resistance, soil, biofilm and prions
  7. 7.Storage, Inventory & Distribution0/4
    1. Replenishment systems and ordering
    2. Receiving in the break-out area
    3. Sterile storage, rotation and transport
    4. Tracking, recalls and inventory problems
  8. 8.Patient Care Equipment0/4
    1. Why patient care equipment is noncritical
    2. Cleaning, contact time and a clean work area
    3. Inspection and removal from service
    4. Preparing, storing, distributing and tracking
  9. 9.Professional Skills & Terminology0/4
    1. Procedure suffixes: what the surgeon will do
    2. Body-part roots and putting words together
    3. Protecting patient information under HIPAA
    4. Professional communication and teamwork
Saved in this browser. Move it to another device →
← Infection Prevention

Chapter 6 · Lesson 3 of 5

Sharps, PPE and exposure incidents

1 min read

Under the OSHA Bloodborne Pathogens Standard, contaminated sharps are never picked up by hand. A puncture through soiled gloves is a bloodborne pathogen exposure, and a second pair of gloves does not change that.

Example: a tray arrives with loose scalpel blades among the instruments. The technician uses forceps or another hands-free tool to move each blade straight into a sharps container, then reports the point-of-use failure, because sharps should have been removed where the tray was used.

PPE is chosen for the splash and spray a task can reasonably be expected to produce, not for the room in general.

Flushing lumens with a pressurized water gun turns contaminated fluid into spray, so it calls for fluid-resistant body covering plus a mask and a full face shield. Safety glasses alone, or relying on a sink splash guard, leave the face exposed.

If a technician is stuck by a soiled instrument, the injury is reported. The employer must offer a confidential medical evaluation and follow-up at no cost to the worker, and the event is recorded.

None of this depends on knowing the source patient's status, and a shallow puncture is not an exception. Reporting only to infection prevention, or leaving the decision to the injured technician, is not enough.

Check yourself

1. A technician is punctured by a soiled instrument while emptying a transport container. Under the bloodborne pathogen requirements, what does this exposure incident oblige?

2. A tray arrives in decontamination with loose scalpel blades and suture needles mixed in among the instruments. How should the technician proceed?

Facts checked 2026-11-15 · Sources: CDC: Guideline for Disinfection and Sterilization in Healthcare Facilities (2008), OSHA 29 CFR 1910.1030: Bloodborne Pathogens, HSPA: Certified Registered Central Service Technician (CRCST)

Sterile Processing (CRCST) cheat sheet: every key fact on one page →