Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/41 ▾
  1. 1.Department Operations & Safety0/5
    1. The work environment: pressure, humidity, cleaning and workflow
    2. Attire, jewelry and traffic control
    3. Workplace safety: spills, chemicals and safe lifting
    4. Regulators, standards and the order of authority
    5. Training records, documentation and quality improvement tools
  2. 2.Decontamination & Cleaning0/5
    1. Point-of-use treatment and safe transport
    2. The decontamination room and personal protective equipment
    3. Manual cleaning: water, brushes and detergent
    4. Ultrasonic cleaners and washer-disinfectors
    5. Flexible endoscopes and automated reprocessors
  3. 3.Sterilization Methods0/5
    1. How steam kills and how air is removed
    2. The daily air-removal (Bowie-Dick) test
    3. Physical, chemical and biological monitoring
    4. Release decisions: requalification, implants and immediate use
    5. Loading, wet packs, cooling and low-temperature methods
  4. 4.Packaging & Sterile Storage0/4
    1. Inspecting and assembling instruments
    2. Wraps and wrapping techniques
    3. Peel pouches, rigid containers and labels
    4. Cooling, wet packs and sterile storage
  5. 5.Quality Assurance & Monitoring0/5
    1. Sterilizer records, lot control and traceability
    2. Releasing a load and handling implants
    3. Positive biological indicators, recalls and failure reports
    4. Shelf life, stock rotation and package inspection
    5. Instructions for use, loaners, competency and quality benchmarks
  6. 6.Infection Prevention0/5
    1. The chain of infection, Standard Precautions and hand hygiene
    2. Decontamination design, airflow and safe transport
    3. Sharps, PPE and exposure incidents
    4. The Spaulding classification and high-level disinfection
    5. Microbial resistance, soil, biofilm and prions
  7. 7.Storage, Inventory & Distribution0/4
    1. Replenishment systems and ordering
    2. Receiving in the break-out area
    3. Sterile storage, rotation and transport
    4. Tracking, recalls and inventory problems
  8. 8.Patient Care Equipment0/4
    1. Why patient care equipment is noncritical
    2. Cleaning, contact time and a clean work area
    3. Inspection and removal from service
    4. Preparing, storing, distributing and tracking
  9. 9.Professional Skills & Terminology0/4
    1. Procedure suffixes: what the surgeon will do
    2. Body-part roots and putting words together
    3. Protecting patient information under HIPAA
    4. Professional communication and teamwork
Saved in this browser. Move it to another device →
← Packaging & Sterile Storage

Chapter 4 · Lesson 3 of 4

Peel pouches, rigid containers and labels

1 min read

Steam enters a peel pouch only through the porous paper side. In the sterilizer, pouches stand on edge in a rack with the plastic of one facing the paper of the next. Double-pouching is allowed only if the pouch IFU validates it, with the inner pouch unfolded and paper facing paper.

A wrinkle across a heat seal is an open channel, so the item is repackaged. Write on the film side outside the seal, never on the paper, because ink can wick through and a pen tip can make a pinhole.

Rigid containers are checked with F.I.L.L.: Filters seated, Indicator inside, Label or load card, Locks applied. Indicator tape is not used on them, because baked-on adhesive leaves residue and the container already has tamper-evident locks.

A torn lid gasket, cracked filter plate or failing latch takes the container out of service. Inside any package, the internal chemical indicator goes where the sterilant is least likely to reach, one per level of a multilevel tray. A changed external tape shows only that the package was processed.

Labels carry the lot control number: sterilization date, sterilizer ID and load number, which ties each package to one run for recalls. Special identifiers matter too.

Example: a loaner system arrives as 4 trays for one case, so each tray is marked with its name and 1 of 4 through 4 of 4, plus physician and surgery date. An implant identifier tells staff the load needs a biological indicator and a hold.

Check yourself

1. Where should a peel pouch be labeled?

2. The mnemonic F.I.L.L. is used when assembling a rigid sterilization container. What does it stand for?

Facts checked 2026-11-15 · Sources: HSPA: Certified Registered Central Service Technician (CRCST) exam content outline, CDC/HICPAC: Guideline for Disinfection and Sterilization in Healthcare Facilities

Sterile Processing (CRCST) cheat sheet: every key fact on one page →