Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/41 ▾
  1. 1.Department Operations & Safety0/5
    1. The work environment: pressure, humidity, cleaning and workflow
    2. Attire, jewelry and traffic control
    3. Workplace safety: spills, chemicals and safe lifting
    4. Regulators, standards and the order of authority
    5. Training records, documentation and quality improvement tools
  2. 2.Decontamination & Cleaning0/5
    1. Point-of-use treatment and safe transport
    2. The decontamination room and personal protective equipment
    3. Manual cleaning: water, brushes and detergent
    4. Ultrasonic cleaners and washer-disinfectors
    5. Flexible endoscopes and automated reprocessors
  3. 3.Sterilization Methods0/5
    1. How steam kills and how air is removed
    2. The daily air-removal (Bowie-Dick) test
    3. Physical, chemical and biological monitoring
    4. Release decisions: requalification, implants and immediate use
    5. Loading, wet packs, cooling and low-temperature methods
  4. 4.Packaging & Sterile Storage0/4
    1. Inspecting and assembling instruments
    2. Wraps and wrapping techniques
    3. Peel pouches, rigid containers and labels
    4. Cooling, wet packs and sterile storage
  5. 5.Quality Assurance & Monitoring0/5
    1. Sterilizer records, lot control and traceability
    2. Releasing a load and handling implants
    3. Positive biological indicators, recalls and failure reports
    4. Shelf life, stock rotation and package inspection
    5. Instructions for use, loaners, competency and quality benchmarks
  6. 6.Infection Prevention0/5
    1. The chain of infection, Standard Precautions and hand hygiene
    2. Decontamination design, airflow and safe transport
    3. Sharps, PPE and exposure incidents
    4. The Spaulding classification and high-level disinfection
    5. Microbial resistance, soil, biofilm and prions
  7. 7.Storage, Inventory & Distribution0/4
    1. Replenishment systems and ordering
    2. Receiving in the break-out area
    3. Sterile storage, rotation and transport
    4. Tracking, recalls and inventory problems
  8. 8.Patient Care Equipment0/4
    1. Why patient care equipment is noncritical
    2. Cleaning, contact time and a clean work area
    3. Inspection and removal from service
    4. Preparing, storing, distributing and tracking
  9. 9.Professional Skills & Terminology0/4
    1. Procedure suffixes: what the surgeon will do
    2. Body-part roots and putting words together
    3. Protecting patient information under HIPAA
    4. Professional communication and teamwork
Saved in this browser. Move it to another device →
← Quality Assurance & Monitoring

Chapter 5 · Lesson 3 of 5

Positive biological indicators, recalls and failure reports

1 min read

The exam separates two situations. If a biological indicator is positive and the cause is not found right away, the department must assume the sterilizer has been failing since it was last proven effective.

Every load processed since the last negative biological indicator is recalled and reprocessed, and the sterilizer stays out of service until the cause is corrected. The recall does not wait for a laboratory to identify the growth.

If the cause is found immediately and is limited to one load, such as the operator choosing the wrong cycle, the response is narrower: correct the cause, reprocess that load only, and document both the failure and the corrective action. Releasing the load anyway is never correct, because the indicator shows that load was not proven sterile.

Example: the last negative biological indicator was in Monday's first load. Afterward the sterilizer ran 6 more loads on Monday, 7 on Tuesday and 3 on Wednesday, and the third Wednesday load has a positive indicator with no cause found.

Loads to recall: 6 + 7 + 3 = 16. The written failure report must include the date and time, the sterilizer, the load control numbers and the monitoring results, because without load numbers the affected packages cannot be found.

Check yourself

1. Today's biological indicator in the process challenge device is positive and no cause can be found. What happens to the loads processed since the last negative biological indicator?

2. A biological indicator is positive, and the investigation immediately shows the operator selected the wrong cycle for that load. What is the correct response?

Facts checked 2026-11-15 · Sources: HSPA: Certified Registered Central Service Technician (CRCST), CDC: Guideline for Disinfection and Sterilization in Healthcare Facilities (2008)

Sterile Processing (CRCST) cheat sheet: every key fact on one page →