Sterile Processing (CRCST) Cheat Sheet: Key Facts
Every key takeaway and common trap from the Sterile Processing (CRCST) study guide on one page, grouped by chapter. Tap a lesson link to read the full explanation.
66 facts · 9 chaptersFacts checked 2026-11-15
Chapter 1
Department Operations & Safety
Key takeaways
- Sterile storage is kept at positive pressure, decontamination at negative pressure, and items move one way from soiled to clean to sterile. → The work environment: pressure, humidity, cleaning and workflow
- Temperature and humidity limits come from the facility's HVAC policy, and a reading out of range is recorded and reported, not fixed by propping doors. → The work environment: pressure, humidity, cleaning and workflow
- OSHA requires safety data sheets on every shift, an eyewash in the work area for corrosives, and immediate disinfection of surfaces after a blood spill. → Workplace safety: spills, chemicals and safe lifting
- FDA clears devices, CMS sets Conditions of Participation, and ST79 is a consensus standard where shall means a requirement, should a recommendation and may a permission. → Regulators, standards and the order of authority
- Six Sigma runs define, measure, analyze, improve and control; Lean removes waste; and PDSA studies a small test before spreading it. → Training records, documentation and quality improvement tools
Common trap
- Distractors often give a body the wrong power: AAMI or ISO reviewing products before sale, FDA fining a hospital for skipping an ST79 step, or a department policy outranking the IFU. Match each source to its role before choosing. → Regulators, standards and the order of authority
Quick reference
| Tool | What it does |
|---|---|
| Lean | Eliminates waste, such as extra walking and waiting |
| Six Sigma | Reduces variation and defects: define, measure, analyze, improve, control |
| PDSA | Plan, Do, Study the results of a small test, then Act |
| Tracer audit | Follows a set or patient through the process in real time |
Chapter 2
Decontamination & Cleaning
Key takeaways
- An item that is not clean cannot be reliably disinfected or sterilized, so cleaning always comes first. → Flexible endoscopes and automated reprocessors
- At the point of use, keep soil moist with a water-moistened towel or an enzymatic product, never saline, and transport items in closed, leak-proof, labeled containers. → Point-of-use treatment and safe transport
- Don PPE as gown, mask, eye protection, gloves, and remove it as gloves, eye protection, gown, mask before leaving decontamination. → The decontamination room and personal protective equipment
- Manual cleaning uses cool water, brushes sized to the lumen, brushing under the surface, and detergent at exactly the dilution the IFU states. → Manual cleaning: water, brushes and detergent
- Ultrasonic cleaners and washer-disinfectors clean but do not sterilize, and they are tested with cleaning verification devices each day they are used. → Ultrasonic cleaners and washer-disinfectors
Common trap
- Pre-treatment sprays and enzymatic products are wetting and pre-cleaning agents, not disinfectants. An answer that says a point-of-use spray makes the item safe to handle or removes the need for cleaning is wrong. → Point-of-use treatment and safe transport
- More is not better. Hotter water, stronger detergent and stiffer or metal brushes all appear as distractors, and each one damages the device or locks soil in place. The IFU sets the temperature, dilution and brush. → Manual cleaning: water, brushes and detergent
- Watch for answers that let a machine stand in for a person. The AER cleaning phase does not replace channel brushing, and a washer cycle run a second time does not rescue a device that was never properly pre-cleaned. Whenever a choice skips manual cleaning because equipment is available, it is the wrong one. → Flexible endoscopes and automated reprocessors
Quick reference
| Step | Putting on (donning) | Taking off (doffing) |
|---|---|---|
| 1 | Gown | Gloves |
| 2 | Mask | Goggles or face shield |
| 3 | Goggles or face shield | Gown |
| 4 | Gloves, cuffs over the gown sleeves | Mask, then hand hygiene |
Chapter 3
Sterilization Methods
Key takeaways
- Saturated steam kills by coagulating and denaturing proteins, and any air left in the chamber or pack keeps steam from reaching the surface. → How steam kills and how air is removed
- The Bowie-Dick test checks only air removal, is run daily in an empty prewarmed chamber before the first load, and two failures take the sterilizer out of service. → The daily air-removal (Bowie-Dick) test
- Only the biological indicator directly shows lethality; physical and chemical monitors show that conditions were met. → Physical, chemical and biological monitoring
- Implant loads are held until the biological indicator is read, except for a documented emergency release on an exception form. → Release decisions: requalification, implants and immediate use
- A wet pack is contaminated and must be fully reprocessed, so loads are arranged and cooled to prevent condensate. → Loading, wet packs, cooling and low-temperature methods
Common trap
- A failed air-removal test is not fixed by running the same pack again for more exposure, adding extra indicators to every tray, or releasing the sterilizer because the edges changed. None of these removes air. Repeat once, and if it fails again, take the unit out of service. → The daily air-removal (Bowie-Dick) test
- A chemical indicator, however advanced, never stands in for a biological indicator. Distractors that release a load, an implant or a repaired sterilizer on chemical results or paperwork alone are wrong, except for the documented implant emergency. → Release decisions: requalification, implants and immediate use
- Distractors often reverse the loading order, putting textiles under metal, or lay basins and pouches flat to save room. Others suggest drying a damp pack and using it. Water must always be able to drain away from porous goods, and a wet pack is always reprocessed. → Loading, wet packs, cooling and low-temperature methods
Quick reference
| Cycle type | How air leaves | Typical use |
|---|---|---|
| Gravity displacement | Steam enters at the top and pushes the heavier air out the bottom drain | Nonporous, non-lumened items; longer exposure |
| Dynamic air removal: prevacuum | A pump pulls air out before exposure | Porous and lumened loads |
| Dynamic air removal: steam-flush pressure-pulse | Repeated steam flushes and pulses above atmospheric pressure | Same as prevacuum; a leak cannot suck air back in |
| Processed BI | Unprocessed control BI | Meaning |
|---|---|---|
| No growth | Growth | Pass |
| Growth | Growth | Fail: sterilization failure |
| No growth | No growth | Invalid: spores or incubator cannot be trusted |
Chapter 4
Packaging & Sterile Storage
Key takeaways
- Soil on any one instrument sends the whole tray back to decontamination, and damaged instruments are tagged for repair, not fixed at the table. → Inspecting and assembling instruments
- A package must let the sterilant in and out, then act as a microbial barrier and open aseptically. → Wraps and wrapping techniques
- Label pouches on the film side outside the seal and wrapped trays on the indicator tape, using a felt-tip pen or printed label. → Peel pouches, rigid containers and labels
- External indicators show only that a package was processed; internal indicators go where the sterilant is least likely to reach. → Peel pouches, rigid containers and labels
- Sterility is event-related: packages stay sterile until tears, moisture, crushing or rough handling compromise them. → Cooling, wet packs and sterile storage
Common trap
- Several answer choices sound helpful but are repairs done by the wrong person: bending clamp tips together, honing scissors, pushing insulation back, taping over a gap. The correct choice is to tag the instrument and remove it from service. → Inspecting and assembling instruments
- Watch for answers that rescue a wet or compromised package: air-drying it, blotting it with a sterile towel, running an extra drying cycle, or trusting a printed date over obvious damage. None of these restores the barrier. → Cooling, wet packs and sterile storage
Quick reference
| Instrument | Test | Failure means |
|---|---|---|
| Scissors | Cut test material suited to their size | Must cut cleanly to the tip; otherwise repair |
| Clamp (hemostat) | Close and hold to the light | Light between jaws = misaligned; remove from service |
| Needle holder | Close on a needle at the second ratchet and try to turn it | Needle turns easily = worn jaws; repair |
| Insulated laparoscopic | Look for nicks and pull back on the insulation | Sliding insulation or a gap = re-insulate |
| Storage clearance | Reason |
|---|---|
| Solid bottom shelf at least 8 to 10 inches above the floor | Keeps packages out of floor-mopping splash and aerosols |
| At least 18 inches below sprinkler heads | Leaves the spray pattern unobstructed |
| At least 2 inches from outside walls | Prevents condensation from wetting packages |
Chapter 5
Quality Assurance & Monitoring
Key takeaways
- A lot control identifier traces a package to its sterilizer, cycle and date; it is a traceability tool, not proof of sterility. → Sterilizer records, lot control and traceability
- A knowledgeable person releases each load only after reviewing all of its monitoring results, and implant loads wait for the biological indicator. → Releasing a load and handling implants
- A positive biological indicator with no identified cause means recalling every load back to the last negative result and taking the sterilizer out of service. → Positive biological indicators, recalls and failure reports
- Sterility depends on package integrity, so any tear, broken seal or moisture sends the item back for reprocessing, while a manufacturer's expiration date is always honored. → Shelf life, stock rotation and package inspection
- The manufacturer's validated instructions for use govern how a device is processed, so a set without them is held until they are obtained. → Instructions for use, loaners, competency and quality benchmarks
Common trap
- Watch for answers that let one piece of evidence decide everything: release because the cycle ended without an alarm, use the set because other trays passed, or discard the whole load because of one indicator. The correct answer weighs all monitoring data for that load and leaves the decision to the knowledgeable person or supervisor. → Releasing a load and handling implants
Quick reference
| Record | What it holds |
|---|---|
| Lot control label on each package | Sterilizer, cycle number and date |
| Sterilizer record for each cycle | Load number, contents, exposure time and temperature, operator, and the biological, Bowie-Dick and chemical indicator results |
Chapter 6
Infection Prevention
Key takeaways
- Reprocessing a device breaks the chain of infection at the mode of transmission, because the instrument is the vehicle that would carry organisms to the next patient. → The chain of infection, Standard Precautions and hand hygiene
- Decontamination is enclosed and kept at negative pressure, and items move one way only, from soiled to clean to sterile. → Decontamination design, airflow and safe transport
- Contaminated sharps are moved with forceps, never with the hands, and any exposure is reported for free, confidential follow-up. → Sharps, PPE and exposure incidents
- Spaulding assigns the level by what the device touches on that use: sterile tissue means sterilization, mucous membrane means at least high-level disinfection, intact skin means low-level disinfection. → The Spaulding classification and high-level disinfection
- Cleaning comes first because soil and biofilm shield organisms from the agent, and prions need a special protocol while C. difficile does not. → Microbial resistance, soil, biofilm and prions
Common trap
- Distractors in this topic offer a quick workaround: leave the door open until the cart is unloaded, aim a fan, wipe the floor and reuse the container, or finish the delivery route first. When a barrier, airflow or container fails, the correct answer fixes or contains the problem, reports it, and documents it. → Decontamination design, airflow and safe transport
- Wrong answers classify a device by its name or family: transducers are always semicritical, endoscopes never need sterilization, anything inside the body is critical. The correct answer always asks what tissue the device contacts this time. A transesophageal probe touches the esophageal mucosa, so it is semicritical, not critical and not noncritical. → The Spaulding classification and high-level disinfection
Quick reference
| Category | Contact | Minimum processing |
|---|---|---|
| Critical | Sterile tissue, joint spaces or the bloodstream | Sterilization |
| Semicritical | Mucous membranes or non-intact skin | High-level disinfection |
| Noncritical | Intact skin only | Cleaning, then low-level disinfection at the labeled contact time |
Chapter 7
Storage, Inventory & Distribution
Key takeaways
- A PAR system restocks each area to a set quota on a schedule, while an exchange cart system swaps a used cart for a full one that central stores has inventoried and restocked. → Replenishment systems and ordering
- Every order needs the right unit of measure as well as the right quantity, because 10 boxes and 10 eaches are very different amounts. → Replenishment systems and ordering
- Shipping cartons stay in the break-out area, and shortages, wrong items and damaged packages are recorded and resolved, never quietly absorbed. → Receiving in the break-out area
- Rotate stock by expiration date so the earliest date goes out first, and never stack sterile packages unless the IFU allows it. → Sterile storage, rotation and transport
- A recall can mean correction as well as removal, so follow the recalling firm's notice right away and report back to the firm. → Tracking, recalls and inventory problems
Common trap
- When an order arrives ten times too large, the distractors blame the reorder date, the catalog number or the PAR level. If the numbers multiply by the pack size, the cause is the unit of measure. → Replenishment systems and ordering
- Wrong answers make the paperwork match without fixing anything: editing the packing slip to show what arrived, shelving the delivery and correcting the count later, or returning everything with no record. A discrepancy is written down and resolved against the order. → Receiving in the break-out area
- Shortcut answers look efficient: relabel a substitute with the usual catalog number, reseal a full-looking code cart, or use up recalled lots first. Each one hides a problem from the people who need to know, so the right answer records it and tells them. → Tracking, recalls and inventory problems
Quick reference
| System | How it works |
|---|---|
| PAR (periodic automatic replenishment) | Staff count the unit's stock on a schedule and refill each item up to a set quota |
| Exchange cart | Two carts per unit; the used cart goes back to be inventoried and restocked while the full one stays |
| Requisition | The unit asks for each item, and the request is filled |
| Just in time | Very little stock on hand, delivered shortly before use; lower cost but little buffer in a disruption |
Chapter 8
Patient Care Equipment
Key takeaways
- Equipment that touches only intact skin is noncritical and needs low-level disinfection with an EPA-registered hospital disinfectant, not high-level disinfection or sterilization. → Why patient care equipment is noncritical
- Remove visible soil first, then keep the surface wet for the full contact time on the label, because the label is legally binding. → Cleaning, contact time and a clean work area
- A frayed or crushed cord, a defeated ground or an expired preventive maintenance label takes the device out of service until it is repaired. → Inspection and removal from service
- Before distribution, remove used consumables, assemble the needed disposables, test per the IFU and mark the unit with a clean label or cover. → Preparing, storing, distributing and tracking
- Any unit without a clean label is treated as used, however urgent the request. → Cleaning, contact time and a clean work area
Common trap
- More is not safer. Answers that send a soiled pump to steam sterilization or soak cuffs in a high-level disinfectant sound careful, but they misread the Spaulding level and add chemical exposure. Pick the level that matches the tissue the device touches. → Why patient care equipment is noncritical
- Workarounds keep a defective unit moving: electrical tape over a frayed spot, a note asking nurses to watch the cord, sending it to a low-acuity unit, or peeling off an expired PM label. None of these makes the device safe, so the answer is always to pull it from service. → Inspection and removal from service
- Urgency never skips processing. Answers that carry a hallway unit straight to the ED, or wipe it on the way, sound helpful but skip inspection and contact time. The helpful answer processes the unit and tells the caller when it will be ready. → Preparing, storing, distributing and tracking
Quick reference
| Finding | Correct action |
|---|---|
| Frayed or crushed cord | Remove from service and tag for Biomedical Engineering |
| Missing or expired PM label | Hold the unit for Biomedical Engineering |
| Three-prong plug, two-slot outlet | Use a grounded outlet and report the old one; never an adapter that breaks the ground |
| Part that cannot be decontaminated before shipping | Attach a biohazard label stating which part is contaminated and tell the servicer |
Chapter 9
Professional Skills & Terminology
Key takeaways
- Read a procedure name from the end: the suffix says what is done, and the root says to which body part. → Procedure suffixes: what the surgeon will do
- -ectomy is removal, -otomy is cutting into, and -ostomy is creating an opening, so one letter can change the tray. → Procedure suffixes: what the surgeon will do
- A patient name or record number tied to a procedure is protected health information on any form, and staff see only what their job needs. → Protecting patient information under HIPAA
- When an OR request conflicts with the IFU, name the IFU requirement and offer a compliant alternative. → Body-part roots and putting words together
- Close the loop: document the problem and the action, and make sure someone specific owns the follow-up. → Professional communication and teamwork
Common trap
- -otomy and -ostomy differ by one letter, and exam options often reverse them. Cutting into is -otomy; making a lasting opening is -ostomy. Likewise, do not read -ectomy as an incision. → Procedure suffixes: what the surgeon will do
- Distractors keep the right suffix and change the organ. chol- never means kidney (that is nephr- or ren-), orchi- is the testis while the ovary is oophor-, and a uterus removal is a hysterectomy, not an oophorectomy. Check the root as carefully as the ending. → Body-part roots and putting words together
- HIPAA answers fail in two directions. Some overreact, such as shredding every document with a name on it or notifying a patient over any glimpse. Others underreact, such as leaving a list visible because it supports treatment or ignoring a post made after hours. The correct answer applies a reasonable safeguard or the hospital's own policy. → Protecting patient information under HIPAA