Chapters0/29 ▾
Chapter 2 · Lesson 5 of 5
Bromine, ultraviolet and ozone
1 min read
Bromine works differently from chlorine in two tested ways. First, bromamines, the compounds bromine forms with nitrogen waste, still sanitize, so a combined bromine reading does not call for breakpoint treatment the way chloramines do. Second, spent bromine becomes bromide ion, which is inactive but stays in the water.
Adding an oxidizer such as chlorine, ozone or a non-chlorine shock turns that bromide bank back into active hypobromous acid, so the same bromine works again.
Bromine fits indoor spas and warm-water pools with heavy bather loads, but it is impractical for a large outdoor pool in full sun, because sunlight destroys the residual and there is no stabilizer for bromine.
The CDC model code sets minimum bromine at 3.0 ppm in pools and 4.0 ppm in spas, with a maximum of 8.0 ppm while bathers are present.
Ultraviolet and ozone systems are supplemental. They treat water only as it passes through the equipment room, and ultraviolet is valued because it inactivates chlorine-tolerant Cryptosporidium.
Nothing they do reaches a bather who contaminates the pool between passes, so a chlorine or bromine residual must still be held in the water. A mineral ionizer is likewise supplemental and needs a halogen residual of its own.
Check yourself
1. In a bromine spa, what does adding an oxidizer such as chlorine, ozone or a non-chlorine shock accomplish for the bromide already in the water?
2. A facility installs an ultraviolet system on the recirculation line. Why must a halogen residual still be maintained in the pool itself?
Facts checked 2026-11-15 · Sources: CDC: Model Aquatic Health Code, 5th edition (2024), CDC: Operating and Managing Public Pools, Hot Tubs and Splash Pads, PHTA: Certified Pool/Spa Operator (CPO) certification
Pool Operator (CPO) cheat sheet: every key fact on one page →