Chapters0/29 ▾
Chapter 2 · Lesson 1 of 5
Free, combined and total chlorine
1 min read
When chlorine dissolves in water, the free chlorine splits between two forms: hypochlorous acid, a strong and fast germ killer, and hypochlorite ion, a much weaker one. pH sets the split.
As pH rises, less of the free chlorine is hypochlorous acid, so two pools with the same free chlorine reading disinfect at different speeds and the lower-pH pool kills faster. This is why pH control is a disinfection issue and not only a comfort issue.
Free chlorine that has reacted with ammonia and nitrogen from sweat and urine becomes combined chlorine, or chloramines. It is a weak sanitizer and a strong irritant.
A DPD kit reads free chlorine first and total chlorine after another reagent, and combined chlorine is found by subtraction. Example: total 2.9 ppm and free 2.1 ppm means combined chlorine is 0.8 ppm. That gap is not a reserve; it is a by-product that keeps building until it is oxidized.
- CDC model code minimum free chlorine: 1.0 ppm in pools without cyanuric acid, 2.0 ppm with it, and 3.0 ppm in spas.
- The same code treats free chlorine above 10 ppm with bathers present as an imminent health hazard; product labels set the upper operating limit.
Check yourself
1. Two outdoor pools each test at 3.0 ppm free chlorine. One is operating at pH 7.2 and the other at pH 7.9. What accounts for the difference in how fast each pool inactivates pathogens?
2. A midday test reads total chlorine 3.4 ppm and free chlorine 2.6 ppm. What has the operator learned, and what does the reading call for?
Facts checked 2026-11-15 · Sources: CDC: Model Aquatic Health Code, 5th edition (2024), CDC: Operating and Managing Public Pools, Hot Tubs and Splash Pads, PHTA: Certified Pool/Spa Operator (CPO) certification
Pool Operator (CPO) cheat sheet: every key fact on one page →