Chapters0/29 ▾
Chapter 4 · Lesson 2 of 5
Turnover time and flow rate
1 min read
Turnover is the time it takes the system to move one pool volume through the equipment. Divide gallons by gallons per minute to get minutes, then divide by 60 for hours.
Example: 120,000 gallons at 400 gpm is 120,000 / 400 = 300 minutes, which is 300 / 60 = 5 hours. Running all day, that pool gets 24 / 5 = 4.8 turnovers.
To find the flow a required turnover demands, reverse the steps: gallons divided by hours gives gallons per hour, and dividing by 60 gives gpm.
Example: if the code having jurisdiction requires an 8-hour turnover for a 96,000-gallon pool, the system must deliver 96,000 / 8 = 12,000 gallons per hour, or 12,000 / 60 = 200 gpm. The exam gives the required hours; it does not expect you to know a legal turnover from memory.
Flow can also come from pipe size and velocity: cross-sectional area in square feet times velocity in feet per second gives cubic feet per second.
Example: 0.05 square feet at 5 feet per second is 0.25 cubic feet per second; times 7.5 is 1.875 gallons per second, and times 60 is 112.5 gpm. Skipping the final times 60 leaves a per-second figure that looks far too small.
Check yourself
1. A pool holds 90,000 gallons and the flow meter reads a steady 250 gallons per minute. What is the turnover time?
2. A pool contains 108,000 gallons and the health department having jurisdiction requires a 6-hour turnover. What flow rate must the recirculation system deliver?
Facts checked 2026-11-15 · Sources: PHTA: Certified Pool/Spa Operator (CPO) certification, CDC: Model Aquatic Health Code, 5th edition (2024)
Pool Operator (CPO) cheat sheet: every key fact on one page →