Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
← Water Chemistry & Balance

Chapter 1 · Lesson 1 of 4

pH: a tenfold scale and the operating range

1 min read

pH reports how acidic or basic the water is, from 0 to 14 with 7 as neutral. The scale is logarithmic in base ten, which is the point the exam tests most often.

Each whole unit is a tenfold change in hydrogen ion concentration, so a pool that slides from 7.8 to 6.8 now holds ten times as many hydrogen ions, and a two-unit drop is a hundredfold change.

Even a 0.3 drop, such as 7.6 to 7.3, roughly doubles the hydrogen ions. A small-looking change on the log sheet can mean far more corrosive water.

pH matters for two reasons. It controls water balance, so low pH etches plaster and corrodes metal while high pH favors scale and cloudy water. It also controls how well chlorine works, because the fast-killing hypochlorous acid form shrinks as pH rises. A pool can show the same free chlorine reading at a higher pH and still disinfect more slowly.

  • The CDC Model Aquatic Health Code (2024) keeps pH between 7.0 and 7.8.
  • The same model code treats pH below 6.5 or above 8.0 as an imminent health hazard that closes the pool.
  • The model code is guidance; your state or local health code sets the binding numbers.

Check yourself

1. A commercial pool's pH falls from 7.6 to 6.6 over a weekend. In terms of the pH scale itself, what does that one-unit drop mean?

2. An outdoor pool is held unheated through a cool shoulder season and the plaster begins to etch, even though pH and alkalinity read on target. What is the most likely reason?

Facts checked 2026-11-15 · Sources: PHTA: Certified Pool/Spa Operator (CPO) certification, CDC: Model Aquatic Health Code, 5th edition (2024)

Pool Operator (CPO) cheat sheet: every key fact on one page →