Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
← Pool Math & Calculations

Chapter 4 · Lesson 4 of 5

Chemical dosing from a chart

1 min read

Dosage charts state how much product changes 10,000 gallons by 1 ppm. Scale by the volume, then by the ppm change. Example: a chart says 2 ounces per 10,000 gallons raises free chlorine 1 ppm, and you need a 2.5 ppm rise in 35,000 gallons.

The dose is (35,000 / 10,000) x 2.5 x 2 = 17.5 ounces, and 17.5 / 16 = about 1.09 pounds. Always read whether the chart is per ppm and per 10,000 gallons before you scale.

  • Product strength: if the chart assumes 100 percent and the product is 70 percent, divide by 0.70. A full-strength dose of 8 ounces becomes 8 / 0.70 = about 11.43 ounces.
  • Liquids: 10.7 fluid ounces per 10,000 gallons per ppm, for a 4 ppm rise in 50,000 gallons, is 5 x 4 x 10.7 = 214 fluid ounces, and 214 / 128 = about 1.67 gallons.
  • Breakpoint: total 3.0 ppm and free 1.2 ppm gives combined 1.8 ppm; the target is 18 ppm, so free chlorine must rise 16.8 ppm.

Check yourself

1. A dosage chart states that 2 ounces of a granular chlorine product per 10,000 gallons raises free chlorine by 1 ppm. An operator must raise free chlorine by 3 ppm in a 45,000-gallon pool. Using 16 ounces per pound, how much product is needed?

2. A chart figure of 2 ounces per 10,000 gallons per 1 ppm assumes a product of 100 percent strength. The product on hand is 65 percent available chlorine. How much of it raises free chlorine by 1 ppm in a 40,000-gallon pool?

Facts checked 2026-11-15 · Sources: PHTA: Certified Pool/Spa Operator (CPO) certification, CDC: Model Aquatic Health Code, 5th edition (2024)

Pool Operator (CPO) cheat sheet: every key fact on one page →