Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
← Testing, Maintenance & Troubleshooting

Chapter 6 · Lesson 4 of 5

Cloudy water, stains and scale

1 min read

When water stays hazy for days even though chlorine and pH are in range and the pool has been shocked, the problem is usually particles that are not being removed.

Work from the cheapest and most likely cause outward: compare filter pressure with the recorded clean reading, check run time and turnover, look for returns that short-circuit, and only then look at calcium and alkalinity.

Shocking a third time cannot remove particles the filter is failing to catch, and draining part of the pool or dosing clarifier every day skips the checks that find the real cause.

  • Stain test: hold a chlorine tablet on the spot. An organic stain lightens; a metal stain does not and responds to ascorbic acid instead.
  • A magnet proves nothing, because the metal in a stain is a chemical compound, not free iron.
  • A grey-white crust at the waterline plus a heater losing flow means a positive saturation index; lower pH or alkalinity to bring it back toward balance.

Cyanuric acid that has climbed too high is another slow problem with a single fix: replace part of the water, then switch to an unstabilized chlorine so it does not climb back. Shock, sequestering agents and backwashing do not remove it.

Check yourself

1. A pool has stayed hazy for a week. Chlorine and pH are in range and the water has been shocked twice. What should the operator check next, and in what order?

2. A crusty grey-white deposit is forming at the waterline and the heater is losing efficiency as flow through it drops. Which water condition explains both, and which way must it be moved?

Facts checked 2026-11-15 · Sources: CDC: Model Aquatic Health Code, 5th edition (2024), PHTA: Certified Pool/Spa Operator (CPO) certification

Pool Operator (CPO) cheat sheet: every key fact on one page →