Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
← Water Chemistry & Balance

Chapter 1 · Lesson 3 of 4

The saturation index: scale or etch

1 min read

The saturation index predicts whether water will dissolve calcium carbonate or deposit it. In the form used in the operator handbook, you add the pH value to three table factors, one each for temperature, calcium hardness and total alkalinity, and then subtract a constant for dissolved solids.

Only pH goes in as its own number. Temperature, calcium and alkalinity must first be converted to their small table factors, never entered as degrees or ppm.

Worked example: pH 7.2, temperature factor 0.6, calcium factor 1.8, alkalinity factor 2.0, constant 12.1. The sum is 7.2 + 0.6 + 1.8 + 2.0 = 11.6, and 11.6 minus 12.1 gives an index of minus 0.5. A negative index means aggressive water that takes calcium from plaster and grout and attacks metal.

A positive index means the water is oversaturated and will drop scale on tile, heater tubes and filter media. Factor tables and index calculators differ slightly in their values and in how they treat readings between rows, so use the one your course or health department specifies.

Temperature matters more than many candidates expect. A cold, unheated pool takes a small temperature factor and can etch even with pH and alkalinity on target, while the hottest surface in the system, the heat exchanger, scales first because calcium carbonate is less soluble in warm water. Remember that the index says nothing about sanitation.

Check yourself

1. Take the saturation index as the pH value plus the temperature, calcium and alkalinity factors, minus the dissolved-solids constant. A pool reads pH 7.8, temperature factor 0.7, calcium factor 2.1, alkalinity factor 2.2, constant 12.1. What is the index and what does it mean?

2. An operator adds 7.5 plus 84 plus 250 plus 110, subtracts 12.1, and reports a saturation index in the hundreds. What is the error in that calculation?

Facts checked 2026-11-15 · Sources: PHTA: Certified Pool/Spa Operator (CPO) certification, CDC: Model Aquatic Health Code, 5th edition (2024)

Pool Operator (CPO) cheat sheet: every key fact on one page →