Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
← Back

Study guide · Chapter 3 of 6

Circulation & Filtration Study Guide — Pool Operator (CPO)

22 free practice questions

Circulation and filtration questions on the CPO exam ask how water travels from the pool through the equipment and back, how a centrifugal pump behaves, how each filter type is cleaned, and how to read gauges when something goes wrong. Many items give two or three symptoms and ask for the one cause that explains them all. Required turnover times and flow rates come from the health code where the pool operates, so the exam tests the hydraulics, not a single legal number.

Key takeaways

  • Water flows from the skimmers and main drain to the strainer, pump, filter, heater and chemical feeder, then back through the returns.
  • A centrifugal pump delivers less water as total dynamic head rises, and a starved suction causes cavitation.
  • Sand is backwashed, cartridges are removed and hosed, and a DE filter needs a fresh precoat after every backwash.
  • A high vacuum reading means a suction-side blockage, while a pressure rise above the clean reading means a loaded filter.
  • A single blockable main drain needs a compliant cover plus a second anti-entrapment system such as a safety vacuum release system.

Lessons in this chapter

5 short lessons · 5 min read

  1. 1The recirculation path, step by step1 min
  2. 2Centrifugal pumps, head and cavitation1 min
  3. 3Sand, cartridge and DE filters1 min
  4. 4Reading gauges and flow meters1 min
  5. 5Suction outlets and entrapment protection1 min
View all questions & answers →

Facts checked 2026-11-15 · Sources: PHTA: Certified Pool/Spa Operator (CPO) certification, CDC: Model Aquatic Health Code, 5th edition (2024)

Pool Operator (CPO) cheat sheet: every key fact on one page →Next chapter: Pool Math & Calculations →

Practice questions based on the Pool & Hot Tub Alliance (PHTA) Pool & Spa Operator Handbook and public CDC healthy-swimming guidance. CPO and Certified Pool/Spa Operator are marks of the Pool & Hot Tub Alliance; this site is not affiliated with or endorsed by PHTA. Water-quality limits, turnover requirements and bather loads are set by the health code where your facility operates — always follow that code and your local health department, and confirm current course requirements before testing. About the CPO certification →