Chapters0/38 ▾
- 1.Safety, PPE, SCBA & Communications0/5
- 2.Fire Behavior & Building Construction0/5
- 3.Ground Ladders & Forcible Entry0/4
- 4.Search & Rescue and Ventilation0/4
- 5.Water Supply, Hose, Streams & Extinguishers0/5
- 6.Fire Control, Overhaul, Ropes & Knots0/5
- 7.Firefighter II Operations0/5
- 8.Hazmat Awareness & Operations0/5
Study guide · Chapter 5 of 8
Water Supply, Hose, Streams & Extinguishers Study Guide — Firefighter I & II Certification
Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.
28 free practice questions
This section covers how water gets from a hydrant or pond to the nozzle, how hose is laid, coupled and cared for, how fire streams behave, and which portable extinguisher fits which fire. Questions are usually short scenes with one gauge reading, appliance or label to identify. Each state or accredited agency writes its own Firefighter I/II exam, but they all test these job skills from the national standard.
Key takeaways
- Static pressure is read with no water flowing, residual pressure is what remains while water flows, and an engine on a hydrant should keep at least about 20 psi residual.
- A forward lay leaves the engine at the fire, a reverse lay leaves it at the water source, and a siamese combines lines while a wye splits them.
- Common nozzle pressures are about 50 psi for smooth-bore handlines, 80 psi for smooth-bore master streams and 100 psi for fog nozzles.
- Friction loss rises with the square of the flow, so doubling the flow roughly quadruples the loss, while elevation adds about 0.5 psi per foot.
- Match the extinguisher to the fuel: nonconductive agents for energized electrical fires, Class D powder for metals and Class K wet chemical for cooking oil.
Lessons in this chapter
5 short lessons · 5 min read
- 1Hydrants, water pressure and drafting1 min
- 2Supply hose lays, hose loads and appliances1 min
- 3Hose couplings, rolls and hose care1 min
- 4Fire streams: nozzle pressure, steam and friction loss1 min
- 5Portable extinguishers: classes, ratings and PASS1 min
Facts checked 2026-11-15 · Sources: NFPA 1010 (2024): Professional Qualifications for Firefighters, NFPA 10: Standard for Portable Fire Extinguishers, NFPA 1930 (2025): fire service use of ground ladders, fire hose and other equipment
Firefighter I & II Certification cheat sheet: every key fact on one page →Next chapter: Fire Control, Overhaul, Ropes & Knots →Original practice questions written to the job performance requirements of NFPA 1010 (2024), which replaced NFPA 1001 for Fire Fighter I and II, and NFPA 470 for hazardous materials Awareness and Operations. Not affiliated with or endorsed by NFPA, IFSAC, the Pro Board, or any state fire academy. Each state writes its own certification exam — check your state's fire academy or certification office for its format and which edition it tests. NFPA 1010 standard →