Chapters0/38 ▾
- 1.Safety, PPE, SCBA & Communications0/5
- 2.Fire Behavior & Building Construction0/5
- 3.Ground Ladders & Forcible Entry0/4
- 4.Search & Rescue and Ventilation0/4
- 5.Water Supply, Hose, Streams & Extinguishers0/5
- 6.Fire Control, Overhaul, Ropes & Knots0/5
- 7.Firefighter II Operations0/5
- 8.Hazmat Awareness & Operations0/5
Chapter 1 · Lesson 3 of 5
Turnout gear: layers, inspection, retirement and decon
Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.
1 min read
A structural firefighting coat and pants have three layers. From the outside in they are the outer shell, which resists flame, cuts and abrasion; the moisture barrier, which blocks water, steam and many liquids; and the thermal liner next to the body, which gives most of the insulation.
Reflective shells belong to proximity gear, not structural gear. The design and certification standard is now NFPA 1970 (2025), which absorbed NFPA 1971.
| Care step (NFPA 1850) | When |
|---|---|
| Routine inspection | After every use |
| Advanced inspection by a trained person | At least every 12 months, or whenever damage is suspected |
| Retirement | No more than 10 years after the date of manufacture |
Example: a coat made in March 2015 looks almost new in November 2026. It is over 11 years old, so it is retired. Passing an inspection, an advanced cleaning, or moving it to training does not reset the 10-year limit.
To cut carcinogen exposure, crews do gross decon on scene: brush and rinse the gear, ideally while still on air, then bag it and keep it out of the crew cab.
Check yourself
1. During a routine inspection, a firefighter finds that their turnout coat is in good condition but was manufactured 11 years ago. What should happen to the coat?
2. Listed from the outside in, which three layers make up a structural firefighting coat?
Facts checked 2026-11-15 · Sources: OSHA 29 CFR 1910.134: Respiratory Protection (two-in/two-out, paragraph (g)(4)), NFPA 1010: Professional Qualifications for Firefighters, NFPA 1850: Selection, Care and Maintenance of Protective Ensembles
Firefighter I & II Certification cheat sheet: every key fact on one page →