Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/38 ▾
  1. 1.Safety, PPE, SCBA & Communications0/5
    1. Two-in/two-out and personnel accountability
    2. Maydays, emergency traffic and radio discipline
    3. Turnout gear: layers, inspection, retirement and decon
    4. SCBA readiness, air management and emergencies
    5. PASS devices and roadway scene safety
  2. 2.Fire Behavior & Building Construction0/5
    1. The fire tetrahedron, fuel properties and toxic smoke
    2. Heat transfer and reading smoke
    3. Ventilation-limited fires and hostile fire events
    4. Flow paths, closed doors and applying water
    5. Construction types and collapse hazards
  3. 3.Ground Ladders & Forcible Entry0/4
    1. Ladder parts, materials and service testing
    2. Climbing angle, tip placement and power lines
    3. Forcible entry tools and their care
    4. Forcing doors, locks, glass and roll-up gates
  4. 4.Search & Rescue and Ventilation0/4
    1. Primary and secondary search
    2. Moving victims, downed firefighters and VEIS
    3. Flow paths, door control and timing ventilation
    4. Horizontal, PPV, hydraulic and vertical ventilation
  5. 5.Water Supply, Hose, Streams & Extinguishers0/5
    1. Hydrants, water pressure and drafting
    2. Supply hose lays, hose loads and appliances
    3. Hose couplings, rolls and hose care
    4. Fire streams: nozzle pressure, steam and friction loss
    5. Portable extinguishers: classes, ratings and PASS
  6. 6.Fire Control, Overhaul, Ropes & Knots0/5
    1. Life safety rope, utility rope and rope care
    2. Knots and hoisting tools and hoselines
    3. Interior fire attack: direct, indirect and below-grade fires
    4. Vehicle, grass and flammable gas fires
    5. Property conservation and overhaul
  7. 7.Firefighter II Operations0/5
    1. Command and the Incident Command System
    2. Foam, flammable liquids and BLEVE prevention
    3. Sprinklers, standpipes and smoke alarms
    4. Fire cause, evidence and incident reports
    5. Airbag clearance, thermal imaging and hose testing
  8. 8.Hazmat Awareness & Operations0/5
    1. Response levels, training and a safe approach
    2. Placards, NFPA 704 and container shapes
    3. Using the Emergency Response Guidebook
    4. Product behavior, defensive control and public protection
    5. Control zones, decontamination and protection levels
Saved in this browser. Move it to another device →
← Fire Behavior & Building Construction

Chapter 2 · Lesson 2 of 5

Heat transfer and reading smoke

Varies by state. Your state sets this exam: the number of questions, time limit, pass mark and any state-law section can differ from this practice. Check your state's official handbook or licensing board before you test.

1 min read

Exam questions describe how heat reached a fuel and ask you to name the method. Look for the clue in the scene: a solid path, moving gases, or open space.

  • Conduction: heat moves through a solid by direct contact. A steel beam or pipe can carry heat through a wall and ignite fuel touching the far end, with no smoke in that room.
  • Convection: moving hot gases carry heat, usually up and out through openings and along the flow path.
  • Radiation: electromagnetic waves travel in straight lines across open space. It is the main way a large fire ignites exposures, even when wind carries the smoke away from them.

Smoke is unburned fuel, and crews read four traits: volume, velocity, density and color. Large volume, fast turbulent flow pushed by pressure, thick density and black color together warn of flashover or another hostile event.

Light, lazy smoke points to a small or early fire, and white steam that thins quickly usually means water is reaching the fire.

Example: an engine pulls up to a garage where dense black smoke is rolling hard from every gap under the door. The crew reads this as a hot, fuel-rich space close to flashover and plans water and ventilation together.

Check yourself

1. Arriving at a one-story house, the crew sees thick, black smoke pushing turbulently out of every opening under pressure. Reading the smoke's volume, velocity, density, and color, what does this most strongly indicate?

2. Fire in a basement storage room heats a steel I-beam that runs through a masonry wall. Minutes later, wood stored against the beam in the next room begins to smoke, though no smoke or flame has entered that room. What heat transfer method is at work?

Facts checked 2026-11-15 · Sources: NFPA 1010: Professional Qualifications for Firefighters, UL FSRI: Impact of Fire Attack Utilizing Interior and Exterior Streams, NFPA 220: Standard on Types of Building Construction

Firefighter I & II Certification cheat sheet: every key fact on one page →