Chapters0/35 ▾
Chapter 4 · Lesson 5 of 5
Data destruction and disposal
1 min read
First ask whether the media will be reused or retired. Media that stays in use is sanitized so the device survives. Media leaving for disposal is destroyed so the device, and its data, do not survive.
- Solid-state drives spread writes across spare blocks through wear leveling, so a host overwrite never reaches every cell. Use the drive's secure erase command, or cryptographic erase, which discards the drive's internal encryption key.
- Degaussing uses a magnetic field and works on magnetic platters, not on flash memory. NIST SP 800-88 Rev. 2 warns that many degaussers are too weak for modern drives, so shredding or drilling is surer.
- A quick format only clears the file table and leaves data that recovery tools can still read. A full format in Windows Vista and later also writes zeros over the whole volume, but on a solid-state drive it cannot reach the spare blocks.
- Physical destruction methods in V15 are drilling, shredding, degaussing and incineration.
For example, a solid-state laptop being reissued to a new employee gets a secure erase and goes back into service. A box of retired hard drives leaving the building is shredded, drilled or degaussed instead.
When a third-party vendor shreds drives off site, the organization cannot watch it happen. The certificate of destruction is the vendor's evidence that the listed media were destroyed, and the organization keeps it for audits. It does not transfer the organization's legal duties for the data to the vendor.
Check yourself
1. A solid-state drive is being cleared so the same laptop can be reissued to another employee inside the company. Why is a multi-pass overwrite unreliable here, and what should be used instead?
2. Drives pulled from decommissioned computers are collected by a third-party firm that shreds them off site. What purpose does the certificate of destruction serve?
Facts checked 2026-11-15 · Sources: CompTIA A+ Core 2 (220-1202) V15 Exam Objectives, NIST SP 800-88 Rev. 2: Guidelines for Media Sanitization, NIST SP 800-63B-4: Digital Identity Guidelines, Authentication and Authenticator Management, Microsoft Learn: Change in the behavior of the format command in Windows Vista and later
CompTIA A+ cheat sheet: every key fact on one page →