Chapters0/35 ▾
Study guide · Chapter 1 of 7
Hardware & Mobile Devices Study Guide — CompTIA A+
19 free practice questions
The hardware questions on CompTIA A+ Core 1 describe a part that will not fit, a build that needs the right board, or a device with one clear symptom, and ask what the technician should choose or do. The skill being tested is matching a symptom or requirement to the one component that explains it. This chapter follows the V15 (220-1201) objectives for memory, storage, motherboards, power, displays, mobile devices and printers.
Key takeaways
- Each DDR generation has its key notch in a different place, so a module from another generation physically cannot seat.
- RAID 5 gives up one drive's worth of space to parity and survives one failure, while RAID 6 gives up two and survives two.
- RAID protects against a dead drive, never against deletion or ransomware, so only a backup brings back lost files.
- Shutdowns after sustained load point to heat, while shutdowns at random from a cold idle start point to the power supply.
- A swollen lithium-ion battery is a fire hazard: stop using the device, remove the pack without pressing it, and send it to proper recycling.
Lessons in this chapter
5 short lessons · 5 min read
- 1Memory: DDR generations, dual channel and ECC1 min
- 2Storage: M.2 drives and RAID levels1 min
- 3Motherboards, power supplies and cooling1 min
- 4Displays, video cables and mobile devices1 min
- 5Printers: choosing a type and reading the symptoms1 min
Facts checked 2026-11-15 · Sources: CompTIA A+ Core 1 (220-1201) V15 Exam Objectives, CompTIA A+ certification overview, U.S. EPA: Used Lithium-Ion Batteries
CompTIA A+ cheat sheet: every key fact on one page →Next chapter: Networking, Virtualization & Cloud →Practice questions written to the published CompTIA A+ Core 1 and Core 2 exam objectives and to standard IT support practice. CompTIA and A+ are marks of CompTIA; this site is not affiliated with or endorsed by CompTIA. The exam objectives are revised periodically — confirm the current objectives and exam requirements with CompTIA before testing. About the CompTIA A+ certification →