Chapters0/35 ▾
Chapter 7 · Lesson 3 of 5
Incident response: drive copies and the order of volatility
1 min read
Objective 4.6 lists the incident response duties of a technician: chain of custody, informing management or law enforcement as needed, a copy of the drive for data integrity and preservation, incident documentation, and the order of volatility. The drive copy is a bit-for-bit image of the whole drive, which also captures deleted data that a folder copy would miss.
A hardware write blocker stops any change to the original during imaging, and hashes of the original and the image prove they match, so all analysis happens on the image. Booting the suspect machine, browsing its files or running antivirus on it all change the original.
- Most volatile, collect first: CPU registers and cache, which change constantly.
- Next: memory (RAM) contents, then the temporary file system, then data on the local disk.
- Then: remote logging and monitoring data, and last of all backups and archives.
For example, if a technician arrives at a running server and has time for only one capture before it reboots, volatile data (registers, cache and RAM) comes first, because the disk will still be there after the restart.
Check yourself
1. A technician is collecting evidence from a running system and follows the order of volatility. Which data should be collected FIRST?
2. During a security incident, a technician must preserve the contents of a suspect laptop's drive so it can be analyzed later. What is the BEST way to do this?
Facts checked 2026-11-16 · Sources: CompTIA A+ Core 2 (220-1202) V15 Exam Objectives
CompTIA A+ cheat sheet: every key fact on one page →