Chapters0/35 ▾
Chapter 6 · Lesson 2 of 5
Connectors, short-range links and desk accessories
1 min read
Objective 1.2 names USB-C, micro-USB, mini-USB, Lightning, NFC, Bluetooth, tethering and hotspots, plus docking stations and port replicators. Connector questions hinge on two details: whether the plug is reversible and how many pins it has.
USB-C is a 24-pin reversible connector that replaces earlier USB plugs. Lightning is Apple's proprietary 8-pin reversible connector on older iPhones; newer iPhones moved to USB-C. Micro-USB and mini-USB are older one-way plugs, and USB-A is the rectangular host-side plug.
Range separates the wireless links. NFC works only within about 4 cm, which is why tap-to-pay needs the phone right at the terminal. Bluetooth reaches across a room, and the V15 pairing sequence is fixed: enable Bluetooth, enable pairing on the accessory, find the device, enter the PIN code, test connectivity.
If the accessory never shows up in the scan, the missing step is pairing mode, because the PIN and the test come after discovery. At the desk, a port replicator only duplicates the ports the laptop already has, while a docking station adds ports and features, often through a proprietary connector.
Check yourself
1. A user turned on Bluetooth, but when the phone scans for devices, the new wireless headset does not appear in the list. Following the standard pairing sequence, which step was MOST likely missed?
2. An office wants a low-cost desk accessory that only duplicates the ports already on each laptop, without adding new kinds of ports. Which should the technician buy?
Facts checked 2026-11-16 · Sources: CompTIA A+ Core 1 (220-1201) V15 Exam Objectives
CompTIA A+ cheat sheet: every key fact on one page →