Chapters0/35 ▾
Chapter 2 · Lesson 2 of 5
IP addressing: private ranges, APIPA, gateways and IPv6
1 min read
Three IPv4 blocks are reserved for private use: 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16. The middle block runs from 172.16 through 172.31, so 172.31.200.9 is private but 172.32.0.9 is public. Expect distractors that change one octet, such as 192.169 or 172.35.
A Windows client that gets no DHCP reply assigns itself an APIPA address in 169.254.x.x with a 255.255.0.0 mask and no gateway, so it can reach only other APIPA hosts on its own link. The default gateway must sit inside the host's own subnet.
For example, a host at 10.20.30.45 with mask 255.255.255.0 and gateway 10.20.3.1 can still print and open local shares, but nothing off the subnet works, even by numeric address, because 10.20.3.1 is not in 10.20.30.x. A blank DNS entry would not explain a failure by numeric address.
An IPv6 address is eight groups of four hex digits. You may drop leading zeros in each group and replace one run of all-zero groups with a double colon, used only once. So 2001:0db8:0000:0042:0000:0000:0000:0007 shortens to 2001:db8:0:42::7.
Check yourself
1. A workstation is set to 192.168.1.40 with mask 255.255.255.0 and gateway 192.168.10.1. It prints to the LAN printer and opens the file server, but no website loads, even when typed as a numeric address. What is the cause?
2. A user's laptop connects to the office Wi-Fi with full signal, but no websites or file shares open. ipconfig shows the address 169.254.37.112 with mask 255.255.0.0 and no default gateway. What does this most likely indicate?
Facts checked 2026-11-15 · Sources: CompTIA A+ Core 1 (220-1201) V15 Exam Objectives, CompTIA A+ certification overview, IETF RFC 1918: Address Allocation for Private Internets
CompTIA A+ cheat sheet: every key fact on one page →