Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/35 ▾
  1. 1.Hardware & Mobile Devices0/5
    1. Memory: DDR generations, dual channel and ECC
    2. Storage: M.2 drives and RAID levels
    3. Motherboards, power supplies and cooling
    4. Displays, video cables and mobile devices
    5. Printers: choosing a type and reading the symptoms
  2. 2.Networking, Virtualization & Cloud0/5
    1. Ports and protocols: TCP, UDP and secure replacements
    2. IP addressing: private ranges, APIPA, gateways and IPv6
    3. DNS records and DHCP settings
    4. Wireless bands, cables and switches
    5. Virtualization and cloud computing
  3. 3.Operating Systems0/5
    1. File systems and partition styles
    2. Installing, upgrading and recovering Windows
    3. Windows tools and command-line utilities
    4. NTFS permissions, share permissions and UAC
    5. Linux and macOS essentials
  4. 4.Security0/5
    1. Malware types and the removal procedure
    2. Social engineering: phishing variants and physical tricks
    3. Authentication, accounting and least privilege
    4. Download hashes, certificates and wireless security
    5. Data destruction and disposal
  5. 5.Troubleshooting0/5
    1. Motherboard, memory, power and heat symptoms
    2. Drive, boot and display symptoms
    3. Network and software symptoms
    4. Safety, power and the environment
    5. Change management, backups and professional conduct
  6. 6.Mobile Devices, Virtualization & Cloud0/5
    1. Laptop upgrades and replacement parts
    2. Connectors, short-range links and desk accessories
    3. Cellular data, hotspots, eSIM and location services
    4. Mobile device management, BYOD and synchronization
    5. Virtual machines in practice: snapshots, memory, network modes and VDI
  7. 7.Operational Procedures0/5
    1. Change types and change freezes
    2. Restoring backups: which sets you need and where they go
    3. Incident response: drive copies and the order of volatility
    4. Documents, agreements and talking with users
    5. Scripting, remote access and AI tools
Saved in this browser. Move it to another device →
← Mobile Devices, Virtualization & Cloud

Chapter 6 · Lesson 3 of 5

Cellular data, hotspots, eSIM and location services

1 min read

Objective 1.3 covers turning radios on and off and sharing a connection. A mobile hotspot makes the phone a small Wi-Fi access point, so several laptops can join at once; USB tethering serves only the one device on the cable.

Every byte shared counts against the phone's plan, which is why V15 lists recognizing data caps. For example, three laptops each using about 1.5 GB per hour for a 3-hour session use 3 x 3 x 1.5 = 13.5 GB, enough to exhaust a 10 GB plan before the session ends.

  • eSIM: the SIM is built into the phone, so changing carriers means installing the carrier's eSIM profile, often by scanning a QR code or using the carrier app. A phone with no tray cannot take a nano-SIM.
  • Airplane mode: it turns off cellular, Wi-Fi and Bluetooth, but Wi-Fi and Bluetooth can be switched back on one at a time while cellular stays off.
  • Location: GPS is the most accurate source outdoors but needs a clear view of the sky; indoors the phone falls back to cellular location, which estimates position from several towers and is less precise.

Check yourself

1. A user needs to share a phone's cellular data connection wirelessly with three coworkers' laptops at the same time. Which feature should be enabled on the phone?

2. A delivery app shows a precise location outdoors, but inside a large concrete building with no view of the sky the location becomes much less precise. Which location source is the phone MOST likely relying on indoors?

Facts checked 2026-11-16 · Sources: CompTIA A+ Core 1 (220-1201) V15 Exam Objectives

CompTIA A+ cheat sheet: every key fact on one page →