Chapters0/35 ▾
Chapter 6 · Lesson 1 of 5
Laptop upgrades and replacement parts
1 min read
Objective 1.1 asks you to match a laptop job to the right part. Space is the constant theme: laptop parts are smaller versions of desktop parts, and many are soldered, so the exam checks whether you know which form factor fits and which upgrade actually changes what the user feels.
| Job | Right part or action |
|---|---|
| Add memory to an empty slot | SO-DIMM, about half the length of a desktop DIMM |
| Slow boot and slow program launches | Replace the hard drive with an SSD in the same 2.5-inch SATA bay |
| Failed internal Wi-Fi or Bluetooth | M.2 wireless card, then reconnect the antenna leads that run up into the lid |
| Trackpad pushed up, clicks poorly | Swollen battery underneath: power off and replace with an OEM battery |
For example, a user asks for a faster laptop and offers to pay for either a second memory stick or a new drive. If the machine still has a spinning 2.5-inch drive and memory use is not maxed out, the SSD is the change the user will notice every time it boots.
A 7,200 rpm hard drive or a larger 5,400 rpm drive only trims a little, and an external USB 2.0 drive is slower still.
Check yourself
1. A user reports that the laptop trackpad has started to bulge upward and no longer clicks properly. What should the technician do FIRST?
2. A technician opens a recent laptop to replace a failed internal Wi-Fi/Bluetooth card. In which form factor is the replacement card MOST likely made?
Facts checked 2026-11-16 · Sources: CompTIA A+ Core 1 (220-1201) V15 Exam Objectives
CompTIA A+ cheat sheet: every key fact on one page →