Chapters0/29 ▾
- 1.Hazards, Contamination & Allergens0/4
- 2.Personal Hygiene & Employee Health0/4
- 3.Purchasing, Receiving & Storage0/4
- 4.Preparation, Cooking & Cooling0/4
- 5.Holding & Service0/4
- 6.Facilities, Sanitation & Pests0/5
- 7.Management Systems, HACCP & Inspections0/4
Chapter 3 · Lesson 2 of 4
Receiving: temperatures, condition and rejection
1 min read
Receiving is the last chance to check a delivery before it becomes your problem, so deliveries are scheduled when a trained receiver can inspect them right away, not in the middle of the lunch rush.
| Item | Accept when |
|---|---|
| Cold TCS food | 41°F (5°C) or below, unless a law such as for milk or shellfish sets another temperature |
| Hot TCS food | 135°F (57°C) or above |
| Shell eggs | Truck air temperature 45°F (7°C) or below |
| Frozen food | Frozen solid, no large ice crystals or dried fluid stains |
For vacuum-packed food, slide the probe between two packages instead of piercing one. Reject cans with a bulging end or a rusted or damaged seam, and poultry that is slimy or keeps a finger imprint.
A shallow dent away from the seams or a faded label is not a reason to reject. When something is rejected, set it apart, tell the driver why, get a signed credit slip, and log it.
Example: a case of raw chicken arrives and the probe reads 46°F (8°C) in the product. That is above the 41°F (5°C) limit, so the receiver rejects it at the dock rather than accepting it and chilling it later.
Check yourself
1. A case of frozen shrimp arrives with large ice crystals on the bags and dried fluid stains in the bottom of the case. What should the receiver do?
2. A delivery of fresh chicken arrives. Which observation requires the receiver to reject it?
Facts checked 2026-11-15 · Sources: FDA Food Code 2026
Food Manager cheat sheet: every key fact on one page →