Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Hazards, Contamination & Allergens0/4
    1. TCS food, the danger zone and high-risk guests
    2. Infection, intoxication and the toxins cooking cannot fix
    3. Chemical hazards, physical hazards and food defense
    4. Food allergens and cross-contact
  2. 2.Personal Hygiene & Employee Health0/4
    1. What employees must report and what the person in charge owes
    2. Exclude or restrict: matching the response to the illness
    3. Handwashing: how, where and when
    4. Gloves, bare-hand contact, jewelry and work habits
  3. 3.Purchasing, Receiving & Storage0/4
    1. Approved sources and the records that prove them
    2. Receiving: temperatures, condition and rejection
    3. Storage: shelf order, location and chemicals
    4. Date marking and first in, first out
  4. 4.Preparation, Cooking & Cooling0/4
    1. Safe preparation and approved thawing methods
    2. Cooking temperatures and how to verify them
    3. Raw and undercooked food: advisories, parasites and high-risk guests
    4. Cooling and reheating cooked food
  5. 5.Holding & Service0/4
    1. Hot holding, cold holding and reheating
    2. Using time instead of temperature
    3. Serving food and handling tableware
    4. Buffets, catering and vending machines
  6. 6.Facilities, Sanitation & Pests0/5
    1. Cleaning versus sanitizing
    2. Proving that sanitizing works
    3. Water supply, backflow and drains
    4. Equipment, building surfaces and chemical storage
    5. Pest control and garbage
  7. 7.Management Systems, HACCP & Inspections0/4
    1. Active managerial control and the person in charge
    2. HACCP plans and prerequisite programs
    3. Emergencies, illness complaints and recalls
    4. Inspections and staff training
Saved in this browser. Move it to another device →
← Facilities, Sanitation & Pests

Chapter 6 · Lesson 3 of 5

Water supply, backflow and drains

1 min read

A cross-connection is any physical link between drinking water and something contaminated, such as a hose whose end lies in a mop bucket. Backflow is dirty water moving the wrong way through that link.

When it is caused by a drop in supply pressure, for example after a water main break, it is called back-siphonage, and the dirty water is pulled into the potable system.

An air gap is an open vertical space between the water outlet and the flood rim of the sink or equipment. Nothing can bridge it, so it cannot fail unless someone lowers a hose into the water.

In the 2026 model code it must be at least twice the diameter of the inlet and never less than 1 inch. Example: a 3/4-inch faucet needs a gap of at least 1.5 inches. Mechanical devices such as vacuum breakers depend on moving parts and must be tested and maintained.

  • Sinks that hold food, dish machines and ice bins drain through an indirect connection with an air gap or air break, so a blocked sewer overflows to the floor drain instead of into the equipment.
  • Handwashing sinks stay clear, stocked and used only for handwashing. Sanitizer does not replace a blocked sink.
  • Losing water pressure or a boil-water advisory is an imminent health hazard: stop the affected operations and notify the regulatory authority, unless it has approved a written emergency operating plan.

Check yourself

1. A hose is left on the mop sink faucet with its end lying in a full mop bucket. A water main break drops building pressure. What hazard does this create?

2. Why is an air gap considered the only fully reliable protection against backflow?

Facts checked 2026-11-15 · Sources: FDA Food Code 2026 (full text), FDA: Food Code

Food Manager cheat sheet: every key fact on one page →