Quibank app: now on the App Store — free, works offline. Get the app ↗

Chapters0/29 ▾
  1. 1.Hazards, Contamination & Allergens0/4
    1. TCS food, the danger zone and high-risk guests
    2. Infection, intoxication and the toxins cooking cannot fix
    3. Chemical hazards, physical hazards and food defense
    4. Food allergens and cross-contact
  2. 2.Personal Hygiene & Employee Health0/4
    1. What employees must report and what the person in charge owes
    2. Exclude or restrict: matching the response to the illness
    3. Handwashing: how, where and when
    4. Gloves, bare-hand contact, jewelry and work habits
  3. 3.Purchasing, Receiving & Storage0/4
    1. Approved sources and the records that prove them
    2. Receiving: temperatures, condition and rejection
    3. Storage: shelf order, location and chemicals
    4. Date marking and first in, first out
  4. 4.Preparation, Cooking & Cooling0/4
    1. Safe preparation and approved thawing methods
    2. Cooking temperatures and how to verify them
    3. Raw and undercooked food: advisories, parasites and high-risk guests
    4. Cooling and reheating cooked food
  5. 5.Holding & Service0/4
    1. Hot holding, cold holding and reheating
    2. Using time instead of temperature
    3. Serving food and handling tableware
    4. Buffets, catering and vending machines
  6. 6.Facilities, Sanitation & Pests0/5
    1. Cleaning versus sanitizing
    2. Proving that sanitizing works
    3. Water supply, backflow and drains
    4. Equipment, building surfaces and chemical storage
    5. Pest control and garbage
  7. 7.Management Systems, HACCP & Inspections0/4
    1. Active managerial control and the person in charge
    2. HACCP plans and prerequisite programs
    3. Emergencies, illness complaints and recalls
    4. Inspections and staff training
Saved in this browser. Move it to another device →
← Facilities, Sanitation & Pests

Chapter 6 · Lesson 2 of 5

Proving that sanitizing works

1 min read

A chemical sanitizer works only when its concentration, contact time, water temperature, water hardness and pH are all within the range on its EPA-registered label. These factors interact, so water that is too cold can fail even when the test strip reads correctly, and cutting the contact time short makes things worse.

Strength is measured with a test kit made for the chemical in use; chlorine strips on a quaternary ammonium sanitizer give a meaningless number, and smell or color proves nothing.

In the 2026 model code a quaternary ammonium solution must be at least 75°F (24°C), and any sanitizer other than chlorine, iodine or quat also needs 75°F unless its label says otherwise.

  • A hot-water dish machine sanitizes only if the dish surface itself gets hot enough: 160°F (71°C) in the model code, measured with an irreversible registering temperature indicator run through the machine. The door gauge shows water temperature, not dish temperature.
  • After vomit, feces or blood, routine sanitizer is not enough, and the 2026 code requires disinfection. Clean up, apply a disinfectant exactly as its label directs, then rinse food-contact surfaces with potable water unless the label says otherwise.
  • A master cleaning schedule says what is cleaned, by whom, when and with what. It works only when the manager spot-checks the areas and the signed records and fixes the gaps.

Check yourself

1. The label of an operation's chemical sanitizer states a minimum solution temperature and a concentration range. During a check the sanitizer water is well below that minimum temperature. What should the person in charge conclude?

2. A guest vomits near a self-service beverage counter. After the visible soil is cleaned up, what must be done to the affected food-contact surfaces?

Facts checked 2026-11-15 · Sources: FDA Food Code 2026 (full text), FDA: Food Code

Food Manager cheat sheet: every key fact on one page →